| Page: |
| Home > Help Needed / General Tech Chat > Quick one - Rear brake cylinder thread size | |||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
7th Mar, 2011 at 10:38:59pm
what is the size of the rear brake cylinder threads. I need some banjo bolts sinc the ones for the one piece goodrige hoses seem to have gone missing. On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
Site Admin  15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
7th Mar, 2011 at 11:35:27pm
Should be 3/8 UNF.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
1394 Posts Member #: 1346 Post Whore bromsgrove |
7th Sep, 2013 at 06:50:00pm
sorry to bring this up again, but what length do I need including the thread length. thanks |
||||||
 3673 Posts Member #: 9300 Post Whore Quarry Bonk |
7th Sep, 2013 at 08:06:41pm
Just thread in a 7/16 headed bolt and mark the thread length, then add the width of the banjo fitting and take a tiny bit off so that the thread doesn't bottom out and cause the banjo to not seal properly On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
7th Sep, 2013 at 08:13:13pm
Or maybe a 3/8" bolt... On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
|
3673 Posts Member #: 9300 Post Whore Quarry Bonk |
7th Sep, 2013 at 08:15:14pm
Well, unless he knows what it looks like or has a die around to check the thread size, 7/16 head is the simplest form of easy identification Edited by Carlzilla on 7th Sep, 2013. On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
|
Site Admin 15302 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
7th Sep, 2013 at 09:20:57pm
A 7/16 bolt is 1/4 UNF.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
7th Sep, 2013 at 09:36:04pm
I'm not going to be much use here but I can't remember which I used. There is a short or a long thread version in the single banjo. I had the same decission to make. I bought both as they were so cheep anyway. On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
8th Sep, 2013 at 07:39:01am
Just get a banjo bolt and cut it down to suit. Run it in without the hose and see where it bottoms out. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
3673 Posts Member #: 9300 Post Whore Quarry Bonk |
8th Sep, 2013 at 09:50:30am
Okay my bad, must've confused them, i know one fits haha On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
| Home > Help Needed / General Tech Chat > Quick one - Rear brake cylinder thread size | |||||||
|
|||||||
| Page: |