| Page: |
| Home > Wanted > ONE A+ main bearing shell .10 wanted | |||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
4th Apr, 2011 at 06:44:35pm
I need one lower bearing shell in 010 for an A+ engine. Anyone got one spare? To be honest, it doesn't need to be new, but it needs to be VERY good. On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
 1346 Posts Member #: 2340 Post Whore Dublin Ireland |
4th Apr, 2011 at 07:31:53pm
I would say I have a few in the shop Vegard Ill hunt tomorrow when I get into work :) On 17th Feb, 2009 Rob H said:
I find the easiest way is to super glue the bolt to the end of one of my fingers. ______________________________________________________ |
||||||
|
7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
4th Apr, 2011 at 09:54:14pm
Excellent stuff! On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
4th Apr, 2011 at 09:59:51pm
Failing that I may have. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
6th Apr, 2011 at 11:03:19am
Did you guys find one? :) On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
1346 Posts Member #: 2340 Post Whore Dublin Ireland |
6th Apr, 2011 at 11:05:58am
ahhhh Ill go look now :-S
On 17th Feb, 2009 Rob H said:
I find the easiest way is to super glue the bolt to the end of one of my fingers. ______________________________________________________ |
||||||
|
7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
6th Apr, 2011 at 02:24:23pm
On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
6th Apr, 2011 at 07:39:24pm
I checked and the ones I thought were .10's are stds. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
| Home > Wanted > ONE A+ main bearing shell .10 wanted | |||||||
|
|||||||
| Page: |