Page:
Home > For Sale > everything must go.

madcatminis

User Avatar

549 Posts
Member #: 5327
Post Whore

Dudley, West mids

5th May, 2011 at 09:18:15pm

Well folks as some of you my be aware my missus is about to drop our 3rd sprog out in the next week or two and I've decided that all my mini bits that I've been hoarding for all these years need to go. Im never gonna have enough money to keep projects going.
I'll be at himley Sunday so if your going and you want something off my list drop me a pm.
This list will keep getting updated also.


1275 a+ crank. Small fretting on taper. Journals fine. £35.
1275 a+ pistons on rods. Some marks on piston skirts but rings are good. £25
1100 a+ crank. Fantastic condition. £40.
1100 pistons on rods. £20.
1100 Block. £20.
1100 Cam. £10
Gearbox complete but unknown condition. £35.
1275 a+ standard cams. Have 2. £10 each.
Really deep dish pistons +40'' on a+ rods was told suit turbo use. Need rings. £40.
Front subframe. £15.
Kkk14 turbo. Came of a rover diesel. £35.
K100 Head. Bought this no more than 3 weeks ago from PaulS. What I paid for it. £40.
Rear seats. £5 **pickup only**
Mayfair (I think) standard passenger seat. FREE to collector.

I will post but that will cost extra. Oh and Im open to offers.

****MORE PICTURES ADDED****

Edited by madcatminis on 14th May, 2011.


maccamcvey

User Avatar

847 Posts
Member #: 6673
Post Whore

Worral Sheffield

5th May, 2011 at 10:31:57pm

front sub, is it in good nick? not sure if i can wangle sunday off work yet but if i can i will be at himley so can collect there.


Turbo Phil

User Avatar

4633 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

5th May, 2011 at 10:43:20pm

"Belt drive conversion. Trigger brand. New seals and belt. Covered 150 miles. Non breather type. £40"

I'll take this please. PM me how you'd like payment.

Edited by Turbo Phil on 5th May, 2011.

WWW.TURBO-MINI.COM


theoneeyedlizard

User Avatar

7265 Posts
Member #: 1268
The Boom Boom speaker Police!

Essex

5th May, 2011 at 10:53:44pm

Got any pics of the deep dish +30 pistons?

Who are they made by?

In the 13's at last!.. Just

WRLondon

User Avatar

1170 Posts
Member #: 8636
Post Whore

Surrey

6th May, 2011 at 12:37:31am


Good luck!

ill have them if the pistons are +40
(I've got some +30's that will need rings if anyone needs them, but my block needs a re-bore!)

Reading up on RTS Clutches

On 21st Sep, 2006 Paul S said:
Go on, be brave, put it in the car and tell us how it works.
Pity your bollocks are in line with the flywheel!
On 27th May, 2013 robert said:
putting my testicles on the line for turbo mini owners everywhere ,and they still work !

madcatminis

User Avatar

549 Posts
Member #: 5327
Post Whore

Dudley, West mids

6th May, 2011 at 05:52:52am

I'll reply to you all tonight (sorry) I've got to go to work and have no access to a computer until i get home. :)

turbominij

User Avatar

514 Posts
Member #: 2104
Post Whore

Essex - UK

6th May, 2011 at 07:43:53am

Pm'd

Edited by turbominij on 6th May, 2011.

"Tuning should be a compromise between what is possible and what is necessary"

10)Thou shalt always quest for more power

philc

1394 Posts
Member #: 1346
Post Whore

bromsgrove

6th May, 2011 at 08:03:08am

i will have the block if it has matching caps

Carlzilla

User Avatar

3673 Posts
Member #: 9300
Post Whore

Quarry Bonk

6th May, 2011 at 05:12:26pm

ill take the 1100 head, for a mate, can get it at himley fella, drop me a pm if thats alright

On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper

On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!!

17.213 @ 71mph, 64bhp n/a (Old Engine)

madcatminis

User Avatar

549 Posts
Member #: 5327
Post Whore

Dudley, West mids

6th May, 2011 at 08:04:34pm

All pm's have been replied too.
I've had a lot of questions about the pistons. On the top of the piston it is stamped with +0.4''. With 71.1OD on the opposite side of the crown. I have no idea who they are made by. There are also 4 rings needed for each piston.
Heres so photo's.








This is how deep the bowl is. Holds around 20ml of fluid




madcatminis

User Avatar

549 Posts
Member #: 5327
Post Whore

Dudley, West mids

7th May, 2011 at 07:28:10pm

More pictures.


















bhpmini

User Avatar

40 Posts
Member #: 8907
Member

7th May, 2011 at 08:47:00pm

is the k100 8v or 16v and are you going himley hall ??

ms2 is beyond me come back carbs all is forgiven why did I decide to modify a spi mini *frown* to late to turn back now so please put up with my stupid question and humour me


madcatminis

User Avatar

549 Posts
Member #: 5327
Post Whore

Dudley, West mids

7th May, 2011 at 08:50:03pm

It's a 8v. Yes I'm going to himley. Would you like me to take it with me.

minimad998

29 Posts
Member #: 2128
Member

Wales

7th May, 2011 at 09:22:58pm

pmd about Maniflow turbo downpipe unused
Home > For Sale > everything must go.
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: