Page:
Home > For Sale > 2 YEAR OLD 160BHP TURBO MINI REQUIRES A LOVING HOME...

Choppo

User Avatar

169 Posts
Member #: 409
Advanced Member

Bristol

Guys it?s with a tear in my eye that I type this.

I?m getting married this year and have just bought a house and my Scooby are all draining my wallet, so something?s gotta give?unfortunately this is mini as I just never use it.

Its kept in my garage at all times. The last time I used it properly was at the filming for the ultimate mini extreme DVD. I treated it to a new actuator last week, and took it around the block and its running as sweet as ever.

It has NEVER broken down on me or bust a head gasket. The engine build cost me 1000?s and the turbo was 550 quid recon? from the Turbo Technics, I only take it to a couple of shows a year, and have never gotten around to whipping it up the 1/4 mile!

It needs a good caring home with somebody who will enjoy it and use it more than me, so if you?re interested, or know somebody who might be, contact me on:

www.matt.lamb@Rolls-Royce.com or mpglamb@hotmail.com or PM me here.

I?m after around 5k ono, and will come with a years MOT a spec is below:

Engine:

SRE built 1293cc, Turbo block, balanced and nitro-caburised crack, centre main strap, ARP rod bolts, shot- peened and balanced turbo rods, forged omega pistons with 15cc dish, MED/piper T3 cam, Duplex gears, SRE head, fully worked, 36x31 SS SRE race valves, 8.2:1 CR, Turbo technics recondition T3 with 360 degree thrust bearing, Brand new 10PSI Avonbar actuator (only fitted last week) 2stage boost with new solenoid, 2? maniflow down pipe with lambda sensor for A/F ration meter and custom maniflow exhaust.
Tran-x SC drops, rebuilt cooper box, 5/16th mounting holes, 3.6:1 CWP, lightened non-verto flywheel, orange dia?.
Green air filter, dump valve, Maestro plenium, intercooler and samco hoses, 2core rad.

160 BHP & 165lbs torque (138BHP @ wheels) *This was on SRE?s RR with the original 4 psi actuator running at a max of 1bar, it can run higher boost than this now, but has yet to be re run on the RR?.!


Body:

Tax exempt 1971 clubby, reshelled into late round nosed shell, louvered removable bonnet, avonbar grp5 arches, black with ?house of kolor kamilian Fireball flakes?, Spa racing mirrors


Interior:

Full red leather interior with electric Recaro's ? they even inflate! with headlining, dash rails and rear shelf trimmed to match. Alloy cooper dash, boost gauge oil press etc, sweade steering wheel, 4 point harnesses, 6point FIA safety devices cage with fixed dia?. Alloy door furniture, air flow ratio meter.


Suspension:

Solid mounted sub frame, Spax, hi-lo?s Neg cam lower arms, adj camber brackets, adj tie rods


Brakes:

New KAD 4pots with 7.9? vented discs (bought sep last year) green stuff pads


Wheels:

Black 10x6 rev?s with yoko A008?s with 5x10 spare rev.


See Miniworld article (July 2003), or Ultimate mini extreme DVD.
For pic: http://www.miniresource.com/shows/actionda...bo%20engine.jpg +

http://www.slarkraceengineering.co.uk/miniturbo.htm

See http://www.5portmoc.co.uk/ go to club members and then click on Matt Lamb (poor quality but you can see the interior)


Edited by Choppo on 25th Mar, 2005.

Hannibal: There are two ways we can do this: the easy way and the hard way. In a few minutes my friends and I are going to come down on you like your worst nightmare. You're gonna wish the Earth had opened up and swallowed you whole.
bad guy: What's the easy way?
Hannibal: That WAS the easy way.


b16_b

637 Posts
Member #: 429
Post Whore

newcastle upon tyne

lovely motor if only i had the notes to buy it out right!

congrats on getting married!!!!!*smiley*


Choppo

User Avatar

169 Posts
Member #: 409
Advanced Member

Bristol

Cheers! Fear not though, once the bank balance has recovered i'll embark on another one!

Choppo *wink*

Hannibal: There are two ways we can do this: the easy way and the hard way. In a few minutes my friends and I are going to come down on you like your worst nightmare. You're gonna wish the Earth had opened up and swallowed you whole.
bad guy: What's the easy way?
Hannibal: That WAS the easy way.


BENROSS

User Avatar

9812 Posts
Member #: 332
Resident Cylinder Head Modifier

Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem

cracking car if anyone buys this they have it all done for them

needs must, have been there and it hurts.

go luck with the wedding






b16_b

637 Posts
Member #: 429
Post Whore

newcastle upon tyne

sell your scooby mate! there is thousands of them about not many mini turbos though!!!!*smiley*


Choppo

User Avatar

169 Posts
Member #: 409
Advanced Member

Bristol

lol! I did think about that b16, but the scoobys heater is sooo much better than the minis!!! *wink*

Hannibal: There are two ways we can do this: the easy way and the hard way. In a few minutes my friends and I are going to come down on you like your worst nightmare. You're gonna wish the Earth had opened up and swallowed you whole.
bad guy: What's the easy way?
Hannibal: That WAS the easy way.


b16_b

637 Posts
Member #: 429
Post Whore

newcastle upon tyne

lol worth a try! *smiley*


Nic

User Avatar

9326 Posts
Member #: 59
First mini turbo to get in the 12's & site perv

Herefordshire

sell the scooby sell the scooby sell the scooby
and get a mondeo


iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

scoobys are boring, keep the mini *happy*

how many scooby turbos? how many mini turbos?

get something cheap with a good heater *smiley*


clubman_dan

User Avatar

1128 Posts
Member #: 142
Post Whore

Winchester

dont worry about the heater, just wear a hat
be a man!!! lol *tongue*


AlexF2003

5795 Posts
Member #: 80
AFRacing LTD

Newbury, Berks

hmmm that is one niiice mini!

alex

AlexF

Home > For Sale > 2 YEAR OLD 160BHP TURBO MINI REQUIRES A LOVING HOME...
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: