| Page: |
| Home > Help Needed / General Tech Chat > Anyone know what thread size this temp sensor is likely to be | |||||||
 9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
8th Jun, 2011 at 09:53:06pm
ta daa
Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
8th Jun, 2011 at 10:02:01pm
Almost certainly M12x 1.5
On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
8th Jun, 2011 at 10:12:04pm
It might be m10x1.0 since that is not a Bosch sensor, and intended for Vauxhal On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
8th Jun, 2011 at 10:13:52pm
M10 x 1 would be good. Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
8th Jun, 2011 at 10:17:27pm
My astra had a bosch sensor
On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
8th Jun, 2011 at 10:18:26pm
edit that, lol
On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
8th Jun, 2011 at 10:19:35pm
Good old reliable bosch eh! On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
8th Jun, 2011 at 10:27:02pm
I know I have an m10x1.0 somewhere, hense the caution On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
9th Jun, 2011 at 07:25:05am
I actually have a an M12 x 1.5 somewhere, but can I find it, no. Hence I need a new one.
Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
9th Jun, 2011 at 12:53:04pm
The problem with these un branded cheap sensors is their relibility. Genuine Bosch ones are not that much more expensive. On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
9th Jun, 2011 at 01:11:03pm
I think that you're probably right. As it happens I want to use a temp sensor adaptor (as seen on Ebay), where you cut and tuck it into a hose.
Edited by wil_h on 9th Jun, 2011. Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
9th Jun, 2011 at 01:24:40pm
Demon tweeks
On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
9th Jun, 2011 at 01:28:16pm
All sorted, I found a 1/8 NTP sensor (not BSP that's a mistake above) with the right plug for £12. Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2011 at 01:32:09pm
You could always get one and drill out the 1/8 NPT and tap M12. should be fine On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
 (2)[/url] by [url=https://www.flickr.com/photos/150672766@N03/]Rod Sugden[/url], on Fli) 5988 Posts Member #: 2024 Formally Retired Rural Suffolk |
9th Jun, 2011 at 01:36:41pm
I've installed one of those, just re-drilled and tapped it the size I needed (standard Mini 5/8 UNF in my case as I put the ECU one in the head (where the normal one goes) after sleeving the existing hole down).
Schrödinger's cat - so which one am I ??? |
||||||
 665 Posts Member #: 9345 Post Whore Sheffield |
9th Jun, 2011 at 02:00:18pm
I stuck the old 5/8 mini one in the lathe and drilled through it and used it as the sleeve for an 1/8NPT sender for the ECU. I'd already fitted the head so didn't want to drill and tap it for M12 filling the waterways with swarf. |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
9th Jun, 2011 at 02:06:42pm
I'm putting my ecu temp sensor through a blank over the heater tap hole in the head. Should get lots of flow from the dry deck port. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
9th Jun, 2011 at 02:36:27pm
I did this on the hillclimber, but I want to monitor temps on the Sprint, as I don't believe the gauge, and this has a heater so I can't do that.
On 9th Jun, 2011 apbellamy said:
I'm putting my ecu temp sensor through a blank over the heater tap hole in the head. Should get lots of flow from the dry deck port. Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
| Home > Help Needed / General Tech Chat > Anyone know what thread size this temp sensor is likely to be | |||||||
|
|||||||
| Page: |