Everything needs to go. Supercharger, seats, digi dash, etc
Turbo Mini Forums

I'm selling the Mini and everything that goes with it so I have a mass of stuff I need rid of. I'm sure I'll forget stuff and add to this in the next few days or so. I'll post the smaller stuff but the bigger stuff will need to be collected.

Brand new set of Cobra Clubman buckets with subframes in clack with blue piping. These are still wrapped in bubble wrap and have never been used. I paid close to £300 for them from Huddersfield Spares so I'm looking for about £250 ideally. http://www.minispares-online.co.uk/index.p...=21&prod_id=721

5th Gen M45 supercharger. I bought this off a guy who took it off his brand new Cooper S when he had a Works conversion so this has only seen delivery miles. I'm after £350.

Brand new Arc Angels double skin smooth bootlid, still in the bubble wrap. I paid £75 for this plus delivery so I'd like £60 for it.

Brand new PlayMini stainless DTM and LCB, cost me £170 + delivery from Playmini and I'd like £150 for it.

HIF44 Turbo carb. I bought this off of somebody on TMF who had rebuilt it, it really is in good nick. I want back what I paid for it which was £150.

Megajolt V3 MAP. I bought this untested from somebody else so I have no idea what the deal with it is. So I'm not sure what it's worth to anyone, I've also got a box of Edis bits and modules too - V3 sold pending payment


Oselli Torquemaster inlet manifold, I bought this agggggggggggges ago when I found it for sale. It needs a quick clean inside as it's been left in the spare room with various other crap. I know they're like rocking horse shite now but I don't know what to ask for it.

Brand new shock mounts, bought for £20 so again £15


New stainless (I think) air vent bezels pair £10


Alternator. I *think* this is a 75amp but I'll need to double check. Needs a clean but in good working order. £40

Intercooler bought from MarkGTT. I haven't used it since buying it so I've copied his original sales info. Originally bought from an MX5 specialist and is in very good condition.

Most of the pipework is also of the same standard, however one elbow near the plenum has some slight scuff marks form general engine bay living.. The pic below shows how i had it set up, but it would fit anywhere at the from if not running a front mounted rad.

4 mounting points make fitting and brackets easy.

Core 140mm x 560mm x 65mm
Total length inc end caps 690mm

I paid £200 for it and that is what I'd like back.

Brand new custom black with blue stitching head lining by Retro Retrims. This also has the pillar trim. I paid a pretty fair whack for this so I'd like £40 for it.

That's all I can think of at the moment.

Just to add, postage costs WILL apply to some of the heavier stuff. Obviously I won't posts the seats but quite a few people seem to think I'll post exhausts and stuff for free. I won't. Please don't be offended if I say so.

SOLD

Brand new Koso RX2N digi dash with Mini drive sensor. This cost me £245 and has never been out of the box so I'm looking for £220. http://www.digital-speedos.co.uk/rx2n-10k-...unction-1-p.asp - Dash sold

Brand new Drift oil pressure and volt meter digi gauges. I paid £70 EACH for these from Car Audio and they've never been out of the box so I'd like £60 each for them. Both sold

New alloy super 2 core rad. This is one of the chinese jobs, the ex used one on his Scamp which used to have cooling problems and this worked a treat. I think I paid about £70ish so I'd like £50. - Rad sold

Specialist Components Stainless LCB Manifold. Never used and it cost me close to £80 new so I'd like £65 for it. - sold

Megajolt V4 MAP. I bought this from apbellamy late last year. I'll throw in the hard rev limiter I bought seperately for it aswell. I'm after £125 for it. Sold

Brand new pair of quick release engine mounts, bought these for £20 so £15 - sold

Blue Revotec hoses, I don't even remember buying these but they're in my garage so £20 - sold

Engine steadies. Again, no idea where or when I got these so £15 - sold

Brand new main wiring loom from Auto Sparks. This has a code on and looking at the loom catalogue I have for that time it says it's '1275GT style mk4 style 78- main only with rear fogs'. I got this for Vader as his shell as an SPI and the wiring was SPI aswell and as I have a carb engine it seemed easier to rip it out and buy a new one. The website is showing it as around £150 so I'm after £100 for it - sold

Brand new Arc Angels flip front brackets. I think I paid about £25ish for these at a show so £15 - sold

Brand new bolt on Trigger Wheel, cost me £40 so I'd like £30 - sold

Edited by Mini_the_minx on 12th Jul, 2011.

please give me first dibs on megajolt ill be back in touch in 10 mins!!

edit:
- just updating on here too, i let ya know on facebook, its a pulley and bracket he needs now hes got the ecu, sorry for delay :)

Edited by jamesfawcett on 15th Jun, 2011.

Previous Engine: 1040cc Morespeed engine, 1275 turbo head T2 Turbo Mirage Manifolds Megajolt
Previous engine: STD metro turbo, megajolt
Drives: 399bananahp (flywheel) Honda Civic Vtec b18c4 T28 Turbo 1968 Mini

Megajolt maps to download: http://www.jamesfawcett.co.uk/cms/index.ph...&gid=3&Itemid=3

The V4 or V3 James?

Hi,

I would like the Megajolt V4 too. if James falls through, could i get dibs on V3 and some more details.

Thanks

Asad

I´m interrested in the V4 if james fawcett don´t get back to you.

If i have more toys than you when i die, I WIN

Vultures the lot of you. I'm having the Koso though

If something is worth doing, it's worth doing half of.

Asad, if James doesn't have it then you're next in line. Then Tom.

You can talk John, it wasn't even 5 minutes before you jumped on that dash

how much for the box of edis bits and whats in it???

Done now needs redoing lol

how much 4 the v3 mega jolt

Does the MJ V3 have any leads etc with it?

www.topcatcustom.co.uk

Ill take the SC manifold. Pm sent

I'll need to dig the box of Edis stuff out of the garage first, I'll try and do it once I get back from the Horse.

The V3 is on it's own, the board inside looks to be ok. Make me an offer as I don't know what to ask as it's untested.

pm.ed

I've added more to the original post and I'm just uploading pictures now. Bare with me.

Which Revotec hoses are they? Sorry to hear you're selling up :(

Right, pictures.

The turbo carb







Engine steadies



Alternator




Bezels



Flipfront brackets



Edis stuff



Engine mounts



Revotec hoses



Shock mounts



Oselli manifold




Trigger wheel




Megajolt V3




Intercooler and pipework. Pictures borrowed from MarkGTT




Wiring loom

Edited by Mini_the_minx on 16th Jun, 2011.

pm'd Revotec hoses :)

What happened minx? found something else? and shame john beat me to it, would of had that dash.

I just gave up, I've got bored with it. I'm moving onto a twin turbo Supra once everything has gone.

hey, did you get my message on facebook :) its the trigger wheel and bracket he needs, ill get him to get in touch with you :)

so to everyone else both ECU's not dibbed to me anymore :)

Previous Engine: 1040cc Morespeed engine, 1275 turbo head T2 Turbo Mirage Manifolds Megajolt
Previous engine: STD metro turbo, megajolt
Drives: 399bananahp (flywheel) Honda Civic Vtec b18c4 T28 Turbo 1968 Mini

Megajolt maps to download: http://www.jamesfawcett.co.uk/cms/index.ph...&gid=3&Itemid=3

I did indeed, I've messaged the next person in line for the V4 :)

Everything sold has been posted

I really do need everything gone, I'm open to offers.

£10 posted for the shocker brackets?

PM'd

A job worth doing is a job worth over doing