| Page: |
| Home > Wanted > BMW K 16Valve TURBO KIT | |||||||
|
40 Posts Member #: 3114 Member Buckinghamshire |
9th Jul, 2011 at 07:52:45pm
I'm looking for a turbo kit for the bmw k 16V head, turbo manifold / down pipe / inlet manifold / throttle body / turbo, anything and everything complete engine set up
|
||||||
|
4309 Posts Member #: 1321 Post Whore Wiltshire |
9th Jul, 2011 at 08:06:07pm
Unfortunately for you its a case of make it yourself as no turbo kit yet exists.
On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding |
||||||
|
4018 Posts Member #: 1757 Back to Fucking Tool status Swindon |
10th Jul, 2011 at 12:31:24am
Always a shot try matty, he may make a custom manifold for you Drives
|
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
10th Jul, 2011 at 11:30:38am
MadMatt from the ausmini forum does turbo kits, exchane rate and shipping from aus might be a killer though. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
10th Jul, 2011 at 02:42:57pm
as far as I'm aware there are no off the shelf kits which contain everything you need to do the conversion, however I'm sure if you contacted Specialist Components or Force Racing and offered them enough cash they'd happilly put a kit together for you, just don't expect it to be cheap. Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
40 Posts Member #: 3114 Member Buckinghamshire |
11th Jul, 2011 at 08:03:30pm
Thanks for the info it looks like i might look at going in a different direction for know and just keep the16valve bits for a later project, i have a stroked crank and "S" rods anyone know of the availability of 73.5 pistons suitable to make 1430cc engine |
||||||
 1648 Posts Member #: 9038 Post Whore Carlisle, Cumbria |
11th Jul, 2011 at 08:37:23pm
for the likes of pistons try MED |
||||||
|
248 Posts Member #: 7936 Senior Member DK-8450 Hammel. Denmark |
11th Jul, 2011 at 09:33:12pm
The compleet turbo kit is made for a K head.
If i have more toys than you when i die, I WIN |
||||||
 6549 Posts Member #: 1149 #1 Basshunter Fan Force Racing ICT Dept Manager Miglia Turbo Am frum Yokshyer tha noes! |
11th Jul, 2011 at 10:53:21pm
Speak to mr austin he may be able to help. 1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.
|
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
16th Jul, 2011 at 05:56:11pm
The manifold does tend to be a personal choice since some want the turbo in the same position as the 5 porter, and some like to have it up top where the carb used to be, there is also the choice of turbo to consider. Nothing is impossible for Fast Carl , you just need to know where you want the turbo and which turbo you want. On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
 703 Posts Member #: 105 1st to provide proof of a running Bimmy Conversion! Brisbane ,Australia |
16th Jul, 2011 at 11:59:22pm
www.miniman.com.au
|
||||||
| Home > Wanted > BMW K 16Valve TURBO KIT | |||||||
|
|||||||
| Page: |