More parts to sell *updated 08/08*
Turbo Mini Forums

spax standard height front dampers, red with green adjustable nobs, used but in good condition £45


4 12x6 revos need the paint stripping and re-painting but they're not curbed and they're true etc most of the paint is already off as I was half way through it £60


Belt drive kit, looks similar to the minispares one but I can't be sure, no external cover (easy to make one if you really need one but I was going to run without, really all it needs a clean/paint cosmeticly looks very diry in pic but it's in good condition otherwise) comes with brand new seals and belt. £75


brand new ultralight flywheel, inertia ring gear (not sure where from but it's a quality one) tiny bit of surface rust but nothing wire wool can't fix £110

ultralight back plate, new, again not sure where it's from but it's freaking light! tiny bit of surface rust but nothing wire wool can't fix £50

*puts wire wool on shopping list*

AP paddle, it was new in the box £50

3.76 diff for A+ £45

3.44 diff for A+ £45

3.2 diff for A+ £60

facet red top brand new with 5/16 90 degree unions, no box as I was actually just about to fit it lol. £50

sytec regulator, used £10

inertia starter motor £15

SPI rad £10

alternators £10

metro finned rocker covers, bare £10

A+ rods with 1275 pistons £30

1275 drop gears heclial £30

11 stud arp kit new £110

Benross top spec turbo head £450



steering colum no key £20



brake servo £15



Ported fast road head, 36/29 valves, new guides but need honing, comes with valves and springs, top caps and collets £130



I'm in need of a useable Garrett GT17 + "front pipe" and a 3.1 crown wheel so may do a deal, might consider a S/C box too as I'm not sure how long my helical box will last at potentially 200bhp

Edited by danrock101 on 8th Aug, 2011.

Megajolt please :)

second on megajolt if it falls through

Done now needs redoing lol

I'll take the x pin diff please!!!

I'll take the rear camber brackets please.

I will take the crank. Pm me payment info.

Very interested in the 6X12 Revos. Any pictures? First dibs on these please

could i take i take pro tec shocks and high lows please ,il pm u for payment info

Any holes or marks on the seats?

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

also very interested in the revo's if you will post.

this is the best picture I could do, the black paint will come off easy as it's only a couple of layers, wont take too much to get them up to a new standard.
I can post them, should be able to get them in one package for £7.50 but it might have to be £15 will need to check.

There's no holes are marks on the seats, they're also vinyl backed, they're in really good condition especially for the age!

2nd dibs on hi lo's and shocks

rick

pm sent

ms2 is beyond me come back carbs all is forgiven why did I decide to modify a spi mini to late to turn back now so please put up with my stupid question and humour me

you sure they are 6 x 12's and not 5 x 12's? The spokes are sat way further back on my 6 x 12's? Is it cast into the back of them? Cheers, smiffy

That's what I was told, I'll try and have a look, I know when my mate fitted them he had to cut his wings so they don't rub

Pm's

updated, pics to follow

PMéd

If i have more toys than you when i die, I WIN

paddle plate please?

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!

some prices reduced, more bits added, loads more to come

Edited by danrock101 on 8th Aug, 2011.

paddle plate still up for grabs?

yes, eden chickened out because it's a 3 paddle

i certainly did lol

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!

Have PM'd but no reply, I'd definitely like the front Spax shocks please and interested in the flywheel and backplate

www.topcatcustom.co.uk

sorry been busy with work (and got a new job yay, got to be strong and not tempted to give all my money straight to force racing haha, might just have to get some wheels though)

Edited by danrock101 on 14th Aug, 2011.