Page:
Home > Help Needed / General Tech Chat > Anyone with a 1330 turbo?

scotty_18

53 Posts
Member #: 9508
Advanced Member

Bromley

Hi guys, I'm currently building a 1330 engine, and have now decided to turbo it - luckily enough I'm not too far into it!

At the moment I have a 1275gt rod change close ratio gearbox (A+layshaft conversion) and I have a 3.44 diff on the way although I'm gunna go with a 3.1 instead and a X-pin.

I was just wondering what sort of spec you're running? What performance parts you have or reccommend? I've found the PDF table sheet on here which is really helpful, but thought i'd get some more info.


Amp

432 Posts
Member #: 7856
Senior Member

Essex

You should really set a budget (don't expect to stick to it though) and use the search to see what you can afford, bearing in mind what you want the car for, i.e. trackdays, every day car etc etc, how much power your aiming for, that way you can ask more specific questions are yours are rather general!

*Megajolt is a highly recommended addition from what I have seen on here, but it depends on your requirements. Also your best to have an intercooler if you want to raise the boost, get a well worked head (Benross or Turbophil on here), consider a GT17 on a custom manifold (matty on here I think makes them), otherwise T2 on Mirage manifolds to avoid cutting the bulkhead, or T2/T3 on a metro turbo manifold using a bulkhead box, the list does go on and on, but seriously, search has all your answers*

Edited by Amp on 10th Aug, 2011.


scotty_18

53 Posts
Member #: 9508
Advanced Member

Bromley

It'll be used more for a weekend/toy to be honest. Mainly for shows though. And I'm not too fussed on a budget as I have a 998 in my car at the moment but am building the engine outside of the car and will be a fairly slow build. So I'm just slowly collecting parts.


bennyy

User Avatar

2233 Posts
Member #: 9037
Post Whore

Doncaster, yorkshire

Mikerace on here has a 1330 turbo.

It all depends on your budget/prodicted output as to what parts are necessary.

Audi s4 b5 - 470bhp & 486ft lbs

On 15th Mar, 2012 wil_h said:

Yes, Carl says he gets requests for rimming all the time

On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble *wink*


John

User Avatar

10023 Posts
Member #: 1456
Mongo

Barnsley, South Flatcapshire

I have a 1330 turbo.

If something is worth doing, it's worth doing half of.


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

On 10th Aug, 2011 John said:
I have a 1330 turbo.

Technicaly it's mine as possession is nine tenths of the law *wink*

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*


scotty_18

53 Posts
Member #: 9508
Advanced Member

Bromley

Well I havent really thought of a predicted output really. I don't want something MEGA! But something that goes when I want it to. Say around 130-150BHP?

Home > Help Needed / General Tech Chat > Anyone with a 1330 turbo?
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: