few things to sell, update 18/09/2011
Turbo Mini Forums

Adjustable front adjustable Camber Kit and Bushes for classic mini

never seen the road,
been fitted to my project mini for about 4 months

few marks but fully usable

with brand new orange poly bushes

(removed due to fitting fixed degree arms)

£70 including postage

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Brand new cones

(these also havent seen the road nor even a mini!)

£50 pair


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Genuine rover front subframe

removed from my mini recently due to fitting a light weight alternative

it is in very good condition and will only need a quick wire brush and a lick of paint to look as good as new.

£40 can arrange courier for this is £18 uk mainland

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

used front hi los

stainless steel perfect threads, used for 300 miles when mini came off the road last year. these where put into storage

will need a polish but are complete up to the job
£25

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

oil cooler with pipes (or free if bought with engine below)

clubman length pipes bought from new
recently spray painted black

£40

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1275 mg metro engine (21k from NEW)

bought from fast parts (mini specalists 3 years ago)
this was owned by one of the managements mothers, who owned a metro with this engine fitted from new and it was looked after by the company. it was then fitted into a member of staffs innocenti for two years and was only removed due to them going 16v

uprated turbo water pump
chrome fan pulley
turbo clutch (minispeed)
lightened flywheel
hiff44
alloy inlet manifold
lightened engine bracket and slave cylinder bracket
3 into 1 (heat wrapped)
all top end gaskets replaced
red clear dizzy cap
New yellow HT leads

perfect compression on all cylinders

stage 4 minispeed turbo head (recipts to prove)
http://www.minispeed.co.uk/content/unleade...4-cylinder-head

everything to do with the engine is perfect and it drove beautifully and ran well

if engine doesnt sell for asking price or OVNO i will split head and sell seperatly as i have already had a few offers for just the head

£600

all items can be couriered or collected from croydon i will also update with more stuff i have for sale over the next few days

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

random polybushes (all new not needed as i have doubles) £9 pairs

front tear drops
rear floor mounts
front brace mounts

polybushed top engine steady £13

Edited by blister on 18th Sep, 2011.

i do have a complete megajolt set up for sale

(minus trigger wheel and sensor bracket)

also comes with a laptop that is fully compatable

megajolt has a hard cut rev limitier installed and comes complete with all the edis kits

fully tried and tested and everything works as it should but never ran on the road

after £400 including postage

if anyone needs any more information please pm me

if you split the head let me know... also how megajolt with out laptop

cheers

dont mind splitting engine and head,
also will sell jolt without laptop pm me your offers and i will take the into consideration and let you know

link to a few photos

http://picturepush.com/+RZBf

How much for engine without stage 4 head?

Class C 3rd Place Avon 2011 14.18 @101mph

If you split the Camber Kit, I would have the bottom arms at the right price.

simon.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

i do have a standard 1275 head which was a recon one from minisport i would be after the going rate for a mg metro engine which is 450

madmk1 please could you pm me your offer for the bottom arms

listed a few things on ebay,

http://www.ebay.co.uk/itm/330615990307?ssP...984.m1558.l2649