Clutch oil seal
Turbo Mini Forums

So who's changing the clutch oil seal this winter? I have done the last two, I have used the super duper seal that minispares sells and I use the centering tool but the buggers still seam to leak...

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Minispeed do a good one mate, as when I had my miss hap at Mitp all the gaskets leaked in the gearbox and even the bolts in the clutch housing were leaking.

But the oil seal was fine

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

I need to change mine.

I found that the oil gallery holes on my primary gear sat very close to where my seal runs. I now don't push the seal quite as far in, and its been fine since.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

I will try the mini speed one thanks.

On another note I even tried an extra breather to no avail

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

I am going to open the gearbox breather out to 1in when i get time aswell.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.