Swapsie : GT20 for a GT17 (GT17 Acquired)
Turbo Mini Forums

I've got an as new GT20 (fitted and ran for a couple of days before enging declared bust).
Still got the box etc.

Would swap for a GT17 in similar condition.

Edited by John on 3rd Jan, 2012.

If something is worth doing, it's worth doing half of.

Ill swap you

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

I don't want your smokey joe mike!

If something is worth doing, it's worth doing half of.

I've got one spare, nearly zero play. The housing is round at Carls at the mo and close inspection indicates that it might have been apart at some point. Came from a runner. I sure its a good un.

Or


I could just go balls out and run 20psi with the GT20 and you can have the other GT17 I have which is pretty much a new turbo been on a car for a couple of 1000 miles

But I'm not sure I want all that torque on the road yet

Edited by Sprocket on 21st Dec, 2011.

What is it John ...a 2052?

if so I'd be interested. I've got a good used GT17 with very little play.

In the 13's at last!.. Just

2056

If something is worth doing, it's worth doing half of.

Sorry, that's the one I meant lol.

In the 13's at last!.. Just

Ideally I would like an as near as new turbo like the one I have. Let me have a think about it.

If something is worth doing, it's worth doing half of.

What was the GT20 like John?

What do you mean tom? I haven't personally run it.

It's a 751578 from an Iveco Turbo Daily.

The chap bought it new put the turbo on his van then after 2-3 days realised the engine was bollocksed. Removed it boxed it and I bought it.

If something is worth doing, it's worth doing half of.

With all these offers of GT1752 flying around, I am on the lookout for another for my new project - any offers ?.

the gt20's are great Tom :)

Yes i moved to the darkside

Instagram @jdm_brett

Was just wondering what it was like on say a 1293 with a ph 2 cam etc, all the usual trick bits. Boost threshold really. I have one from Ricks group buy.

something like this :)



tbh on the road it's miles better than a standard T3 and the only difference i could tell from my old T25 was how quickly the needle gets round to 20psi and how well it holds it at the top end. I've not tried/driven a GT17 though so can;t really compare the 2.

Edited by Nick on 22nd Dec, 2011.

looks a bit peaky for me. I think I'll try my luck with the gt17 first and then see where to go from there :)

id say about 1k later to 20 psi .ish than a 17.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM

Right I have a GT17 now so this GT20 will probably be up for sale shortly.

I also have an exhaust flange and a full gasket set from wolfie.

Edited by John on 3rd Jan, 2012.

If something is worth doing, it's worth doing half of.

i could do with another flange john :)

Yes i moved to the darkside

Instagram @jdm_brett