Page:
Home > For Sale > Plenum for K heads

xuminimaniac

39 Posts
Member #: 9431
Member

Portugal - Lisbon

17th Jan, 2012 at 08:25:27pm

Hi there.

I've got this plenum for sale or for swap.

I've machined it when I develop and machine my K convertion kit and the plenum was only to start the engine because I had no carbs.then I've got a matched webber 40"s and let the plenum on the shelf as you can see only have machine the holes in the plenum with the center holes of the intake and for fixing it to the head.

It may need some work to be perfect some chamfers on the intakes.... but the hard hork is done.










the alloy used is 7050 and for the two flanges between plenum and head the alloy is 7075 ( the 7075 alloy are the best as used in aerospace industry and the 7050 are one of the 2nd one best ally's)

I intend to swap it for a K 8V or 16V head (head cams and cam cover).

more pics please e-mail.

Im happy to pack and ship wordwide.

Cheers

Edited by xuminimaniac on 17th Jan, 2012.


Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

17th Jan, 2012 at 08:50:44pm

Looks good, but where did you plan to put the injectors??

Team Racing

On 15th May, 2009 TurboDave said:
I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials

xuminimaniac

39 Posts
Member #: 9431
Member

Portugal - Lisbon

17th Jan, 2012 at 09:54:25pm




On 17th Jan, 2012 Jimster said:
Looks good, but where did you plan to put the injectors??


I machine it with the intention only of attacht a HIF just to try my convertion.I guess if injection is to be used the plennum can be machined down a bit to get room for the throttle bodies.

Home > For Sale > Plenum for K heads
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: