11/16" UNF to -8AN adaptor - where to buy?
Turbo Mini Forums

Hi

Would anybody know where I could get an adaptor union for the oil pipe coming out of the engine block.
My block has the 11/16" UNF thread and all I can find is an adaptor to -6AN.

Im after one that converts to -8AN

Thanks

Think auto

Thanks.. I've emailed them. Couldnt find anything in the catalogue.

What size do most use for the oil cooler lines? -6 or -8 hoses?

I think most are at least -8AN. I think mine might be -10. They are certainly bigger than the -8 I have off the fuel tank to the first filter. -6AN is fuel line size.. very small.

what is the 11/16unf for

I'm using an6 thats what the braided hose kit comes with from mini spares that goes from the block to the oil filter housing, but was in two minds wether to use an8 or an6 for the cooler but when I cheaked the bore on the pipes going into the oil cooler (the big fat ones 3/4bsp) at there smallest point was only about 10mm internal bore.

I think an6 would be ok I've got an oil cooler with pushfit pipes and there only 10mm stubs off it.

Craig

my mini van http://www.turbominis.co.uk/forums/index.php?p=vt&tid=448248

try this I'm on my sons computer but as I said above its an6

Craig

http://www.minispares.com/Product.aspx?ty=pb&pid=42822

Edited by nala56 on 23rd Feb, 2012.

Main Build
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=489133

Upgrade to Turbo
http://www.turbominis.co.uk/forums/index.p...tid=448367&fr=0