Gauge Mounting - Fittings Required
Turbo Mini Forums

I'm finally refitting the gauges to the Mini but the original 52mm gauges I have didn't have the retaining fittings. I've done a quick Internet search but found nothing. Anyone have any lying around they don't need or can point me in the right direction?

Hopefully the Frog will be back on the road soon! I've booked the MOT for the 23rd April, but may be a little premature!

My build thread: http://www.turbominis.co.uk/forums/index.php?p=vt&tid=440970

Isn't it just a bent piece of metal with two holes in it?

you could make one real easy, my last gauges I just wrapped tape around the gauge so it was a nice tight fit :)

Audi s4 b5 - 470bhp & 486ft lbs

On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble

I made some for mine as the spacing between the gauges was too close for the original brackets.

They were just a strip of metal bent in a flat sided U shape with 2 holes in the middle.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi