| Page: |
| Home > Help Needed / General Tech Chat > diff pre-load/shimming? | |||||||
|
Forum Mod  4828 Posts Member #: 154 Post Whore Midlands |
13th Apr, 2012 at 08:38:57pm
Just a quick one chaps, having a bit of a brain fart and haven't done this for years.
On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF. |
||||||
 6753 Posts Member #: 828 Post Whore uranus |
14th Apr, 2012 at 06:18:37am
isnt it your 20 thou gap , plus whatever preload you need ,which depends on what type of bearings you have ?
Edited by robert on 14th Apr, 2012. Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM |
||||||
|
Forum Mod 4828 Posts Member #: 154 Post Whore Midlands |
14th Apr, 2012 at 06:34:26am
i have no idea chap, my haynes is really old and just says rod change gearboxes are new fangled things so i'm a bit dubious to trust it.
On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF. |
||||||
|
Forum Mod  5933 Posts Member #: 784 9 times Avon Park Class C winner Milton Keynes |
14th Apr, 2012 at 07:09:14am
I give it a 1 thou pre load, so with a 20 thou gap Id fit 21 thou of shims I seriously doubt it! |
||||||
 690 Posts Member #: 1851 Post Whore Woolavington, Zummerzet |
14th Apr, 2012 at 09:33:17am
Don't forget the gasket !
Metric is for people who can't do fractions. |
||||||
|
Forum Mod 4828 Posts Member #: 154 Post Whore Midlands |
14th Apr, 2012 at 04:58:59pm
Cheers chaps :) On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF. |
||||||
 825 Posts Member #: 9661 Post Whore Sheffield South Yorkshire GB. |
14th Apr, 2012 at 10:31:29pm
Surely if you preload it should be minus 1 thou, not plus.. Main Build
|
||||||
|
825 Posts Member #: 9661 Post Whore Sheffield South Yorkshire GB. |
14th Apr, 2012 at 10:52:17pm
Main Build
|
||||||
|
Forum Mod 5933 Posts Member #: 784 9 times Avon Park Class C winner Milton Keynes |
15th Apr, 2012 at 04:23:11am
On 14th Apr, 2012 nala56 said:
Surely if you preload it should be minus 1 thou, not plus.. No, plus. Minus 1 thou would take load off I seriously doubt it! |
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
15th Apr, 2012 at 07:14:00am
Also, measure the gasket as they are not at all the same thickness as what the Haynes manual states. On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
|
825 Posts Member #: 9661 Post Whore Sheffield South Yorkshire GB. |
15th Apr, 2012 at 07:31:42pm
I realised my mistake after the post, that's why I posted the photo I took from the manual, I got it wrong, sorry..
On 15th Apr, 2012 paul wiginton said:
On 14th Apr, 2012 nala56 said:
Surely if you preload it should be minus 1 thou, not plus.. No, plus. Minus 1 thou would take load off Main Build
|
||||||
| Home > Help Needed / General Tech Chat > diff pre-load/shimming? | |||||||
|
|||||||
| Page: |