| Page: |
| Home > Beginners Tech > Intercooler positioning | |||||||
 690 Posts Member #: 1851 Post Whore Woolavington, Zummerzet |
26th May, 2012 at 08:22:01am
I'm having a bit of a think about where to put the intercooler for my long-awaited (as in been thinking about it for 6-years) blow-through supercharger setup.
Metric is for people who can't do fractions. |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
26th May, 2012 at 08:28:18am
Have a look at Nic and madmk1s cars. they run this setup and it seems to work well. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
 4629 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
26th May, 2012 at 08:30:30am
It needs to be really well ducted though to get a decent airflow. |
||||||
 882 Posts Member #: 9774 Post Whore Buckinghamshire |
26th May, 2012 at 08:30:58am
What about under the front valance? That's where I originally planned to put mine, until I mocked it up and found that I had no where to run the boost pipes.. With a holier subframe than mine it wouldn't be too dificult to run the boost pipes? http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0 |
||||||
 2233 Posts Member #: 9037 Post Whore Doncaster, yorkshire |
26th May, 2012 at 08:48:15am
The wing area works well if ducted really well like Phil says, otherwise there not much good, my side mount rad cools plenty where it is now, would much rather use the space up front for a good intercooler imo. Audi s4 b5 - 470bhp & 486ft lbs
On 15th Mar, 2012 wil_h said:
Yes, Carl says he gets requests for rimming all the time On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble  |
||||||
|
690 Posts Member #: 1851 Post Whore Woolavington, Zummerzet |
26th May, 2012 at 09:55:11am
It's a Clubbie estate, so there is more scope to put something down inside the valance than with a roundnose - but I'm thinking that a side mount would enable me to have better curves on the pipework instead of elbows. Metric is for people who can't do fractions. |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
26th May, 2012 at 11:07:49am
wintersurfers intercooler install works well On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
| Home > Beginners Tech > Intercooler positioning | |||||||
|
|||||||
| Page: |