Modded 8.4" brakes to clear most 10;s
Turbo Mini Forums

Just taken these off the car last night as i've changed to an S setup. They've been on my car for about 5/6 years now and came from a rallycross mini so they're definately proven safety wise.

They started out as a standard 8.4" disc setup, the discs have been machined down to 7.9", standard 8.4" pads. The majority of the work is to the calliper, the mounting holes have been welded and redrilled to get them sitting closer to the centre of the disc and the outside has been machined down aswell.

There's plenty of meat left in the discs and pads, the calliper pistons could probably do with replacing or cleaning up in my opinion though.

Comes with discs, pads, flanges and callipers as removed fromt eh car.

Looking for £75 collected from Wolverhampton. A nice cheap alternative to a fiesta conversion without the faffing around.

I'll have that, if you can send within the UK. Please? :)

I take it that the hub is included?

Edited by Vegard on 19th Jul, 2012.

no hubs sorry V, the passenger side was knackered and i'm still using the drivers one.

Ok, then I'm out. Sorry.

no probs :)

so this is a fast bolt on 10" mod - i only need the callipers. Will widened reverse rims go under these? - and do you know weight? cheers

all sold now sorry chap

complete setup weighed 14.2kg though.