Page:
Home > Wanted > **** NEED INTERCOOLER URGENTLY!!! ****

pat71

15 Posts
Member #: 9956
Member

Brisbane, Australia

Hey there as the title states I'm looking for an intercooler to fit at the front of my roundnose mini. Preferably something that's already been modified to fit in already. If it isn't though would still be interested. Not looking for anything where the grille wont fit etc tho...

I have a standard dizzy & alternator so it would have to be compatible with that also obviously. If anyone has 1 just collecting dust on the garage floor would be a big help :) . If so if you could swing us a picture please & a price.

Thanks for looking.
Pat


Chalkie

1909 Posts
Member #: 9764
Post Whore

Northamptonshire.

If no one replies go to a local scrap yard :) lots of diesels run intercoolers think astra has a small one so do rovers :)


bennyy

User Avatar

2233 Posts
Member #: 9037
Post Whore

Doncaster, yorkshire

With a standard dizzy, your going to struggle to get one in without disturbing the grill. The landy td5 is the only one I can think of, and it requires a slight bend. I have a custom alloy one made by ah fabrications, requires the starter motor rotating and the grill spaced out 10mm, hardly even noticeable

Audi s4 b5 - 470bhp & 486ft lbs

On 15th Mar, 2012 wil_h said:

Yes, Carl says he gets requests for rimming all the time

On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble *wink*


Craigie-B

User Avatar

1492 Posts
Member #: 9468
Post Whore

Wootton Bassett

I have a standard R5 GTT intercooler if of any use to you

On 10th Mar, 2012 theoneeyedlizard said:

Hypothetically speaking, where would you stick your nozzle?


On 22nd Jun, 2012 apbellamy said:
my wife doesn't know what.head is never mind compression ratio.


pat71

15 Posts
Member #: 9956
Member

Brisbane, Australia

Yeah whatever goes in will have to be tinkered with to fit I'm sure...just trying to keep it to a minimum... the landrover td5 def is a skinny bitch lol...anyone got a 2wd cosworth lying around??


pat71

15 Posts
Member #: 9956
Member

Brisbane, Australia

Thanks for the offer craigie b but I've actually alreay got a r5 GTT & it has no chance of fitting somewhere practical!


Carl S
Forum Mod

User Avatar

1927 Posts
Member #: 1761
Stalker

Bristol

Put your location in your profile pat71.


wolfie

User Avatar

8215 Posts
Member #: 90
Post Whore

Somewhere around Swindon

i had a custom one made for the front of my mini that i would be willing to part with, it was made with a quality pace core however its been in and out a few times so is scratched would be looking at £70 (about 1/3 of what it cost to make)

I am in the middle of building a loft in my garage and all my parts are boxed up so cant sort it out for a proper photo until middle of the week at the earliest

you can see it in this photo

Edited by wolfie on 22nd Jul, 2012.

Crystal Sound Audio said:

Why wolfie...you should have your name as Fuckfaceshithead !


"A common mistake that people make when trying to design something completely
foolproof is to underestimate the ingenuity of complete fools."-Douglas Adams


Craigie-B

User Avatar

1492 Posts
Member #: 9468
Post Whore

Wootton Bassett


No worries buddy, had it laying around thought Id ask :)

On 22nd Jul, 2012 pat71 said:
Thanks for the offer craigie b but I've actually alreay got a r5 GTT & it has no chance of fitting somewhere practical!

On 10th Mar, 2012 theoneeyedlizard said:

Hypothetically speaking, where would you stick your nozzle?


On 22nd Jun, 2012 apbellamy said:
my wife doesn't know what.head is never mind compression ratio.


bennyy

User Avatar

2233 Posts
Member #: 9037
Post Whore

Doncaster, yorkshire

Wolfie that's a bargain at £70, much, much more than mine

Audi s4 b5 - 470bhp & 486ft lbs

On 15th Mar, 2012 wil_h said:

Yes, Carl says he gets requests for rimming all the time

On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble *wink*


pat71

15 Posts
Member #: 9956
Member

Brisbane, Australia

Any modifications needed to fit it in wolfie? Do you have an under the bonnet pic of it showing where the ports are etc also? Thanks.


pat71

15 Posts
Member #: 9956
Member

Brisbane, Australia

Intercooler purchased. Many thanks to Benross for organizing the shipping of the intercooler asap for me. Appreciate the effort steve. Thanks to all who offered advise also.


BENROSS

User Avatar

9812 Posts
Member #: 332
Resident Cylinder Head Modifier

Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem

A pleasure pat





Home > Wanted > **** NEED INTERCOOLER URGENTLY!!! ****
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: