Megajolt V3 + some odds and ends
Turbo Mini Forums

Just trying to get some money together to top up my bank account after some recent purchases.

Megajolt now SOLD

Next is a set of standard tie bars, nice and straight, £10.



Stage 1 kit (not sure if it is of use to anybody).
Includes: Air filter (K&N cone), HS4 Carb with needle to suit standard 998 with this kit, Minispares inlet manifold, maniflow, exhaust manifold and RC40 side exit exhaust.
(Pictures to follow).

Standard dipstick, £3 (black).

Simplex timing chain, £10.


Can take all items to MITP or ask me for postage costs.

Found some more stuff;
Standard plenum chamber, good clean condition, fresh black paint; £30
Standard 998 A+ camshaft, maybe good for an exchange unit? £10
Set of ford coil pack leads, clip on type, short, ideal for dizzy mounted coil pack; £10
Pre verto slave cylinder, used but working fine, £10
Verto slave cylinder bracket, nice condition, cleaned and painted black, £10

Edited by Mike-998 on 20th Aug, 2012.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

id probably buy it mate but wouldnt have a clue how to wire it up

give em hell

Theres a guide here:

http://autosportlabs.net/MJLJ_V3_vehicle_installation_guide

That tells you where all the wires go in the connector, and all the wires will come labelled.

Hope that helps.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

just had a look not for me mate ,wiring looks a nightmare

give em hell

How much for the stage 1 kit chap?

Done now needs redoing lol

I don't know really about the stage 1 kit, it cost me about £200 from minispares, and has done about 1000 miles, not even enough for the filter to need cleaning, so how does £150 sound?

and Mercenary62, it is really simple, just connect the labeled wires to the labeled pins from the diagram, then connect the labeled earths and ignition positives to the engine earth strap and a spare spade on the fuse box respectively, and that is it. All the complicated bit is already made up, the loom is ready to go in, apart from the connector which just has crimp pins which slot into the connector.

I am trying to get a connector to repair it, and may have some spare pins lying around somewhere, but not sure if i can manage that before MITP.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Cheers stage 1 kit isn't for me, have let a mate know though.

No worries, cheers

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Hi Mike,

I could be interested by your Megajolt setup if it is a map version.

Hello guys I'm from France and since my 18th birtday I 'm dreaming of a turbo engine in my Mini. I'm here to do it !

Hi, yes it's the MAP version

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Thanks for your reply, are ok to send it to France if I pay for the delivery charges ?

Hello guys I'm from France and since my 18th birtday I 'm dreaming of a turbo engine in my Mini. I'm here to do it !

Sure, If you're willing to cover the cost of postage I'll send it wherever you like.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Is the Megajolt running ok, as I saw that you had problems with this setup running only on the Edis ?

Hello guys I'm from France and since my 18th birtday I 'm dreaming of a turbo engine in my Mini. I'm here to do it !

It was running fine after I ironed out some problems, i just wasn't running the v3 software.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

got that postage quote yet?

Sorry mate, been pretty busy at work at the moment, I'm literally on my way to the post office now

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

Still for sale?

I've just dropped you a pm, sorry.

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0