engine cuts out when trying pull away however high the revs are
Turbo Mini Forums

hi all need some serious help/ guidance with my engine
basically i have a 1275 metro turbo engine with new turbo hif 44 and t3 turbo

ive tryed a different distributer (59d)and coil rather than the duclier no different

could it be jet related ?

also if i rev it up when not underload it will rev turbo kick in etc then go to give it another rev and it dies and cut out

any tips or anything would be much appricated thanks charlie

Dashpot oil? Or idle mixture?

Edited by bennyy on 20th Aug, 2012.

Audi s4 b5 - 470bhp & 486ft lbs

On 30th Apr, 2012 Brett said:
yeah stick the bit in and give it a wobble

Do you use the "tee piece trick"!?

works for me http://www.turbominis.co.uk/forums/index.php?p=vt&tid=2103

Pedro Silva

http://miniciados.blogspot.pt/

the turbo kicks in when you rev it? .. cool
Could be the common mistake with the plenum to carb gasket being fitted the wrong way round

Yes i moved to the darkside

Instagram @jdm_brett

hi benny the dash pot oils fine will check the mixture tomorow, sim-ou-nao what tee piece trick? and brett well yeah the turbo spins up obivously. will the gasket cause it to litrally just cut out when you try to pull away

See the link.... http://www.turbominis.co.uk/forums/index.php?p=vt&tid=2103

do you have a photo from your carb in the car?

Pedro Silva

http://miniciados.blogspot.pt/

i dont know how to add photos lol

Yes i moved to the darkside

Instagram @jdm_brett

http://www.steves-digicams.com/knowledge-c...tobucket.html#b

Pedro Silva

http://miniciados.blogspot.pt/

Are your photos in photobucket?.

Main Build
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=489133

Upgrade to Turbo
http://www.turbominis.co.uk/forums/index.p...tid=448367&fr=0

If your pictures are in photo bucket



This is what your post should look like to put pictures on TM, to do this you need to go to photo bucket, hold your mouse over the photo you wish to show, click the second option down, then go back to post reply in TM, select the icon on the right that I have circled in red, when box opens paste your image in, and it should look like the sample shown..

Main Build
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=489133

Upgrade to Turbo
http://www.turbominis.co.uk/forums/index.p...tid=448367&fr=0

Sounds like a possible arir leak. Check that the float bowl breather is blocked and that the part-thriottle lean off pipe has no splits (this is the most likely thing IMO).

Fastest 998 mini in the world? 13.05 1/4 mile 106mph