For Sale my Morris mini engine-less shell-as endorsed by Mr Mike Race
Turbo Mini Forums

Good Points/whats included:

Always dry stored-Tax exempt 1967 car reshelled into mid 90's car yonks ago, rebuilt around 3 years ago,inc pictures, new front end, boot repair, doors re skinned, new sills ect ect. Body is spot on painted underneath in black epoxymastic paint, subframes were rebuilt with new everything.Front subframe is auto with alloy adaptor plates(home made).

Underneath- Minitastic road coil springs, agx adjustable dampers, adj hd tie rods, adjustable bottom arms,rear camber brackets, finned alloy drums rear, 7.9 vented mini sport fronts-ally calipers. Fletcher rear exhaust box and mid pipe included.

Outside-Minilife wheels, part worn A032's, halogen headlights,recent mk1 grill powercoated oew with smiffy bits release buttons, all the stainless/chrome bits as shown in pics, works style reverse light, mk2 rear lights, new rear fog light, fibreglass bonnet is included but this may need changing, interchangable fg bootlid inc

Inside-Door furniture as shown, one off dash and all clocks(yes including the aem afr gauge), modified capri front seats, matching yellow pipped rear seats,forge bleed valve with switchable solenoid included,front to rear bias valve included, ST steering wheel.

Engine bay/boot-Turbo fuel pump set up in boot, pipework and regulator all included,full megajolt system including leads and trigger wheel-ecu in car, everything under bonnet EXCEPT the turbo elbow and downpipe in the pics.

Bad point/Not included

As stated turbo elbow and downpipe not included.

Water injection kit shown is not included.

Front bumper clip broken at one end, new stainless bumper supplied

Bottom arm bushes need replacing due to broken bottom arm pins, pair of new genuine pins included-THIS NEEDS DOING TO BE DRIVEN ON THE ROAD.

One inner pot joint is bollocksed as shown will need replacing.

Very minor bubbling of paint work under screen near wipers, scratches on boot, drivers door, wing and various other places, tried to show most in pics. Rear bumper lip recently changed as bumper did not fit properly so a line of primer over this as shown. Car would benifit from a blow over.

Would make a very nice road car either with a std 1275 of would really suit a 998 turbo with all the bits on it, either way going to try for £3500 as is, car is located in York.

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

I suppose engine bay pics would be good-duh!

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

Price reduced-£3250 willing to listen to offers/pulling bits off car to make it cheaper ect

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

Chaps this is a fine example to say the least!


Worth every shilling, I have seen it in the flesh

Cheers Steve, much appreciated

Oli

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

dam man i wish that thing would fit in the post box!

thats about $5000 aus fook me! whata bargain to bad i cant get it to aus

Was this car at the Wellingborough rolling road day ?

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

Yes

Well, if someone will buy my Studio 2, then I could be interested.

Part Ex ?

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

Still for sale, now missing the full dash,turbo fuel reg, aem gauge kit and megajolt system any serious offers around £2700?

Edited by oli79 on 20th Nov, 2012.

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

What ta sellin up fo?

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

It was because I was poorer than a church mouse who had got home to find his wife had run away with all the cheese,and I am doing my dads bike too, but its been for sale that long that things are starting to look better financially, even so it seemed time, and if funds allow, to start thinking about having a go at a different project

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

What colour is it? Tahiti blue?

Just gonna point a mate in its direction, but thinking about paint match for the bonnet.

Yep, I have a litre or so left of the paint it was done in

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

No longer available for sale

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?