Also selling up part 1
Turbo Mini Forums

The sell up starts, all Items have postage included, payment via paypal and please send as a gift so I dont get bummed sideways by paypal. As always, feel free to post but FIRST TO GET A PM TO ME GETS THE ITEM.

Turbo carb, rebuilt by me approx 2 years ago and around 6000 miles use since, bead blasted inlet, plenum and carb body, inlet cut and turned forward, dv connection to top side. All linkages zinc, home made heat sheild, everthing as shown in pic, including fuel hoses, reducers and stainless clips, custom needle from my 1293. Minor issue there are 3 x 1/8 npt holes tapped into plenum, one is shown in pics with a brass plug in it, there is another on the side(was for water inj) and the one in the neck part, the fitting shown in the hole is a home made gland to take an air temp sensor, these may need blanking to suit your requirements. £180






LPX1007 filter head, this is the rare spi one with 11/16 threads, not that it makes any difference! Has a home made goodridge hose and a 5/8 block adaptor, block adaptor has parallel threads so needs sealing in place. It has had the troublesome bypass valve removed and welded up-£50 posted




Minispares super 2 core rad used on my car for approx 2 yrs in really good order, has cap, silicone hoses and stainless clips shown-£90 SOLD




Assorted boost hoses, top 2 hoses have 45 degree reducers at 60mm to go onto cossie ic, bottom hose has an 1 3/4 inch end to fit std plenum neck, all others are 2 inch id including alloy pipes and stainless clips shown, see my build thread for the ic set up.-£90 posted



Pre engaged starter motor, was a new halfords unit 2 yrs ago on my car £55 posted



Alternator, late type again a new halfrauds unit 2 yrs ago, plated pulley and fan, think its the high output version, will check-£50 posted



Pre Verto slave cylinder, 2 yrs old, goodridge hose, will include master cyl banjo bolt and washers-£25 posted



Home made coolant expansion bottle £7 posted

Edited by oli79 on 30th Aug, 2012.

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

I'll take the pot joint tool. PM incoming.

You have PM re solenoid and steady.

What are the over all and core dimensions of the Cossie intercooler?

I'll take the radiator.

Carb assembly and dump valve are back up for grabs due to daft price for international postage

Oli

Edited by oli79 on 30th Aug, 2012.

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

Pm sent

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

Hi, do you still have carb and manifold?
Cash waiting

Edited by lee.pb on 5th Sep, 2012.

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile