Also selling up part 2
Turbo Mini Forums

As always first to pm gets the item, paypal preffered please send as a gift, all include postage unless stated.

Mini sport 1.3 roller rockers-spot on £130 SOLD


Steve Benross turbo head,5000 miles since built, stainless valves, 35.6 inlets, uprated springs, 28 cc chambers, includes all items in picture, stat housing, 88 deg stat, arp stainless stat and heater bolts-Im sure Steve will confirm the exact spec if needed-cost £600 will post out for £430-SOLD




Steve Benross bottom end,5000 miles since built, 1293cc accralite pistons,phase 2 cam timed at 108,std rods, hardened crank-again Steve should be able to confirm exact spec if needed, arp rod bolts, centre main strap with cat bolts,includes oil pump, timing cover, duplex steel timing gears, dizzy blank plug, water pump, push rods, head studs.£600 COLLECTED












Straight cut gearbox,again Benross built 5000 miles ago ,mini spares gear set, centre pickup pipe, minispares 4 pin diff, 2.95 cwp. £450 SOLD







Transfer case and wok, from above engine, includes breather, pre verto arm, release bearing, plunger £60 the lot posted

Edited by oli79 on 30th Aug, 2012.

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

all very tempting.. :)

Pm'd about 1.3 rockers

http://www.turbominis.co.uk/forums/index.p...tid=469104&fr=0

don't suppose you have a good crank damper. thanks

il take the drops mate

give em hell

What cc are the pistons and type of fit to con rods? Do you know the deck height?

Class C 3rd Place Avon 2011 14.18 @101mph

14cc dish, Std press fit i believe, deck height 0.4 mm as measured with my verniers

On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet ?

can you put those gears in a remote box?

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

PM'd ref gearbox and head.