Straight Cut Box
Turbo Mini Forums

This is the straight cut box that I recently built for one of my abandoned projects:


Currently sitting under the 998Ti St2 engine:


It's a DAM5626, 3 bolt bearing retainer case. Minispares clubman gearset, straight cut input and idler gears. Rebuilt with new bearings and good used baulk rings.

It has a 3.1 CWP using a Minispares 4 pin diff. Centre oil pickup.

It will include the speedo drive housing with the correct drive gears for a 90s speedo.

Also will include the transfer case which has been fitted with the new input gear bearing race and a torrington idler bearing.

It's fitted with a hall sensor on the diff housing for vehicle speed.

£1,000 Collection only.

NO LONGER FOR SALE

Edited by Paul S on 3rd Oct, 2012.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."