| Page: |
| Home > Wanted > Cooper S conrods A.S.A.P | |||||||
|
3 Posts Member #: 9798 Junior Member |
4th Oct, 2012 at 09:08:53pm
Hello i am in the prosess of building a 1430 and i need a set of Cooper S conrods.
|
||||||
|
3006 Posts Member #: 2500 Post Whore Buckinghamshire |
5th Oct, 2012 at 02:26:53am
You could always use Midget rods - much easier to find/cheaper and 90% as good. |
||||||
|
3 Posts Member #: 9798 Junior Member |
5th Oct, 2012 at 07:28:19am
Hello thanks for the help. Would i have to use the 1500 rods ? Edited by naughtyboydan on 5th Oct, 2012. |
||||||
|
3006 Posts Member #: 2500 Post Whore Buckinghamshire |
5th Oct, 2012 at 11:17:00am
No no no, they are Triumph rods and totally different. |
||||||
|
2395 Posts Member #: 229 Gavin@minispares.com kent |
5th Oct, 2012 at 02:30:06pm
http://minispares.com/product/Classic/AEG6...sic/aeg624.aspx
|
||||||
|
3 Posts Member #: 9798 Junior Member |
5th Oct, 2012 at 03:20:59pm
Yes and then i ask have you seen the price of them on minispairs. Lol i dont fancy paying that for all four of them.:) |
||||||
 7765 Posts Member #: 74 I pick holes in everything.. Chief ancient post excavator |
5th Oct, 2012 at 05:15:05pm
What do you expect paying? You're looking at roughly £150, then you'll need new bolts and possible resizing etc. On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem. |
||||||
| Home > Wanted > Cooper S conrods A.S.A.P | |||||||
|
|||||||
| Page: |