can anyone fab up a bore adapter in small bore size ?
Turbo Mini Forums

Well as above.

I need a piece of (Plastic) pipe 2.54 inch ID ( or slightly bigger i.e. up to +100) for a flowbench adapter.

For a big bore you can use rain pipe so you get about +60 but for a small bore I can't find anything off the shelf .

Suggestions usable pipe also very welcome

cheers

That sir, is not rust, it is the progressive mass reduction system

http://aseriesmodifications.wordpress.com/

2.5" or 63mm is pretty damn close to plastic drainpipe stuff.

Should be easy to find ?

68mm OD I presume, but you get the idea

http://www.draindepot.co.uk/index.asp?m=&c...pe+%26+Fittings

9.85 @ 145mph
202mph standing mile
speed didn't kill me, but taxation probably will

Contact Wim at Colltec (Groningen)


They can make you anything you want out of 'plastics'.

Dazed and Confused....

How about this http://www.minispares.com/product/Classic/...stons.aspx|Back to search

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

Thanks for all the suggestions. Well the bore sleeve is a good if a slightly pricy option.

I looked at using e machine ( online CNC) but unless you build at least 5 complete bore adapters ( including changeable bores w. O-ring and such.. no sense to bodge it then so do it properly) the unit price gets silly (about 600-900 usd). Well it is a little more than i am willing to pay anyway.

So I think I will either go with a slightly small bore or slightly large by slicing a 70mm drainpipe one sided along it's length and squeezing it inside the bigger bore.

I will ask the colltec* guys if they can do anything .

Add: Hey they* have extruded PMMA that is well priced ~16,20 euro/meter and near enough in size
and clear as well.. coasts less than half of the fancy cast version.

thanx!

Edited by Sir Yun on 16th Oct, 2012.

That sir, is not rust, it is the progressive mass reduction system

http://aseriesmodifications.wordpress.com/

Nice.
Glad to hear they could help you out.

Dazed and Confused....