bore size question
Turbo Mini Forums

Hi all,

I just like to find out if 1275 standard bore is 70.60mm or is this a overbore on this engine?

Cheers

Bobby

Mate how come you always ask the same questions on TM as you have asked on the school boy forum??

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

ouch that's a bit harsh, should a forum not be so we can get advise?

dude it was all on that CR sheet

Standard 1275cc Engine
Bore 70.61mm
Stroke 81.23mm
Head Chamber Volume 21.40cc
Compression Ratio 9.4:1
Gasket Volume 3.80cc
Ring land Volume 0.5cc
Deck Volume 5.25cc
Piston Volume 6.00cc

the other bores were then listed below that.

I think what si means is that your kinda asking a lot of the same questions; in more places than really is needed.

TM is a very useful site but you really do need to just search more rather than take the easy approach and be lazy. People are willing to help but you have to do some work yourself not be spoon fed.

Its all part of the learning curve

I was not having a go at you just that all this info is on here, if you look for it!!

I have just found what you was looking for.
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=431641


simon.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Ok mate, cheers for the info will use the search bar from now on