Page:
Home > For Sale > My sale I am open to offers on all this stuff.

madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

23rd Nov, 2012 at 09:28:24pm

Hi lads,

I am having a bit of a clear out of the man cave, as I need some space for some new stuff.

All the parts in this ad have been stored for the last year in the back of the shed coverd in WD40 so there may be some surface rust, but it will clean off.

!!All prices are not including post!! But i will find the cheapest way to send it to you as all this stuff is heavy! also I am open to offers so just ask

x2 NOS! Cluch/brake plates £10
x1 carb bracket SOLD


x1 3.44 CWP stamped with 18/62 £30


x1 3.6 CWP stamped with 17/64 £35


x1 new oil pressure switch £5


x3 Differential Output Shaft (Pot Joint) £5 each


x1 Engine crane lifting brackets SOLD


Some bits that i started collecting for a Hardy Spicer setup, I am open to good offers


an old school hub thats been sat about make me an offer!


some drop gears, this is not a set!
Primary Gear 25 Tooth has 1.1 stamped on it (needs new bushes) £40
Idler Gear 31 Tooth has 1.1 stamped on it, £35
Input Gear 24 Tooth, £30


A set of A+ rods with free +20 pistons (IF YOU are happy using them) there are no nuts on the rod bolts £40

Edited by madmk1 on 1st Dec, 2012.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

23rd Nov, 2012 at 09:50:23pm

Simon, I will take the carb plate, PM me the payment in postage and I will send over the dosh...

Graham

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


jarmour116

User Avatar

55 Posts
Member #: 10044
Advanced Member

Ballymoney, NI

23rd Nov, 2012 at 10:47:28pm

What pressure is the oil switch?

madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

23rd Nov, 2012 at 10:47:52pm

I am not sure where i got it from mate.

Edited by madmk1 on 23rd Nov, 2012.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


kappa

882 Posts
Member #: 9854
Post Whore

Hounslow, Middlesex

23rd Nov, 2012 at 10:53:57pm

i will take the engine crane lift bracket, how much for postage?

kappa

882 Posts
Member #: 9854
Post Whore

Hounslow, Middlesex

23rd Nov, 2012 at 10:57:29pm

PM'd

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

24th Nov, 2012 at 09:35:56am

Which side is the hub? Drum or Disk?

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

24th Nov, 2012 at 05:01:48pm

Hi mate, its for the right hand side. I am not sure hor to tell if its for durms or not.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

24th Nov, 2012 at 05:34:13pm

Looks to be disk. Does it have lugs to bolt the calliper to?

http://www.minispares.com/product/Classic/...k%20to%20search

I'll have a look at which side I need for my spare set tomorrow. I'm assuming that no threads are stripped and the bearings haven't spun in it.

Ta

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

1st Dec, 2012 at 08:25:53pm

Andy i have just seen this sorry for not getting back sooner but i have been away with work, its just been sat in in a box for a long time i have never looked at it before now, yes its got the lugs,

I am open to offers on all this stuff just need some space.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


Vegard

User Avatar

7765 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

2nd Dec, 2012 at 11:00:07am

How much for the HS joint?

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

2nd Dec, 2012 at 11:21:52am

How much for the hub posted?

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*
Home > For Sale > My sale I am open to offers on all this stuff.
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: