A+ Gearbox, More bits n bobs added
Turbo Mini Forums

Im having a major clearout so I can get my huge new toolbox in the garage.

I have an A+ gearbox which has the mainsaft still in place, the reverse idler is there as is the shaft, the laygear is there but the shaft is missing. Diff cover is there as is the side cover (speedo drive housing), there is no diff or output covers. The double roller is missing a ball or two so needs a strip, clean and rebuild otherwise it appears to be in good condition



Found a diff for it with outputs and a rusty 59 tooth crownwheel - no pinion



£20 for the casing, the rest is free. Collection only from Milton Keynes

I might have some other bits n pieces later

Paul

Edited by paul wiginton on 28th Jan, 2013.

I seriously doubt it!

Some more bits n bobs

Right hand fuel tank bracket, £5 posted



Stainless steel pistons to fit Metro 4 pot callipers and Minispares alloy callipers, £5 + postage which I need to calculate still SOLD



Vert flywheel centre with good taper, £5 + postage which I need to calculate still



And some freebies, posted at your cost. If nobody wants any of them theyll go in the skip






More crap to follow

Edited by paul wiginton on 28th Jan, 2013.

I seriously doubt it!

Can I take the free bits please?

you have pm paul

Done now needs redoing lol

PM'ing regarding the pistons

*Andy, if I get the pistons, would you let me have the washer bottle bracket too?*

Edited by Amp on 28th Jan, 2013.

Andy, you can have them if you dont mind Mr. clubby above having a couple of the alternator adjusters

Edited by paul wiginton on 28th Jan, 2013.

I seriously doubt it!

Yes, yes and yes.

Let other people shout if they want other bits from the pile, I'm not greedy, just stock piling a few useful bits.

I have your address Andy

I seriously doubt it!

Thanks Andy, there was a couple of other bits that I have asked Paul about as well but it's his call as I know you was there first!

you planning another build andy??

Done now needs redoing lol

Which bits Amp?

Can I get the flywheel center and an alternator bracket set? How much posted to IP28 7BS. Thanks

You can have the flywheel centre but its upto Andy if you can have the brackets as he has requested them.

Ill get you a postage price tommorrow evening

I seriously doubt it!

Do you have any end cover studs, these are the 3 studs that come out of the gearbox on the mounting side?

Most probably, I have dozens of studs - any idea how long they are?

I seriously doubt it!

That works for me. Thanks.

I am not too sure, will try to get a pic and upload something

I can measure some up for you tomorrow after work

I seriously doubt it!

That is great, the only thing is I do not have any studs to work on

I will see if I can get the measurements, after doing some research

Edited by Amp on 28th Jan, 2013.

Hi
any chance i could have the alloy spacer and raidiator/engine mount bracket?

I was most interested in the gearbox bits in the second pic. The column bracket and dog leg steady brackets in the third/fourth picture. From the forth, the bulkhead under master cylinder plate thingys, lower steady brackets, and the fan spacers.

If I could reserve them, then let everybody else grab the stuff they want, then Paul can send me those bits and any left overs if that's OK.

Dave - once it's sorted,let me have the postage cost and your paypal address.

Those parts are reserved for you Andy

I seriously doubt it!

smashing, I'm in no rush for postage.