Your password will probably need resetting - don't panic. We have upgraded a few things and improved the hashing of passwords. Just use the Forgot Password link.
Page:
Home > General Chat > Engine valuation

Pauly

User Avatar

207 Posts
Member #: 9045
Senior Member

Wolverhampton, West Midlands

Hi all,

Not been on here for a while but looking at selling my N/A 1310 fast road engine. Its a really strong motor and has a really nice torque curve, making about 85/90bhp with about 93 lb/ft of torque but never got a proper R/R readout.

Heres the spec grabbed off my build thread on TMF:

Block & bottom end

Metro 1275 A+ base
Acid dipped
Painted red for extra power and strength
Re-bored +40 = 1310cc
Ae 21253 +40 Pistons
New cam bearings
Block deck skimmed 0.008”
Std rods
Std crank, reground 10/10
Crank, flywheel, pulley dynamically balanced
ACL big end & mains bearings 0.010”

Valve train

Kent (billet) MD276 cam
Kent vernier timing gears
Lightened followers
Original pushrods
Minispares 1.5:1 ratio roller tip rockers

Cylinder head

Modified by SRE (Slark race engineering) to fast road spec.
Ported, polished and gasflowed
35.7mm Inlets - 29mm Exhausts
Double valve springs
Bronze valve guides
Skimmed to achieve 21.2cc combustion chambers giving 10.5:1 CR
Painted red

Transmission

Std metro HLE, helical cut gearbox; rebuilt
Minispares 4 pin diff
3.44 Final drive
Centre oil pickup pipe
S/C drop gears - 1:1 ratio
MED ultralight flywheel
Fast road clutch plate
Orange diaphragm/pressure plate
Standard backplate

Ignition & fuel

OEM Lucas 65dm4 Metro electronic distributor
Re-curved & serviced by H&H ignition systems to engine spec
Lucas std 12v electronic ignition coil
Eluminition HT leads
Std metro dizzy cap and rotor arm
No vacuum advance

Standard spec metro HIF44 1 ¾” carb – rebuilt
K&N cone air filter
Facet fast road fuel pump
Filter king regulator
Braided fuel lines

So what realistic price should I be looking at? Searched completed listings on ebay but seems pretty dried up where non standard engines are concerned.

Thanks.

Edited by Pauly on 7th Feb, 2013.


jamiestevenbell

336 Posts
Member #: 9941
Senior Member

Derby

How old is it and how many miles has it done?


Pauly

User Avatar

207 Posts
Member #: 9045
Senior Member

Wolverhampton, West Midlands

Engines a few years old, barely done a few thousand miles. Nicely run in and doesn't smoke.


jamiestevenbell

336 Posts
Member #: 9941
Senior Member

Derby

I just sold a similar engine but it had a 286 in it and had a print out to show 93bhp for 1200

Home > General Chat > Engine valuation
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: