| Page: |
| Home > For Sale > Cutting Up Shell | |||||||
 3329 Posts Member #: 184 Senior Member Melton Mowbray, Pie Country |
28th Feb, 2013 at 12:53:48pm
I have aquired a shell so that I can liberate the bulkhead. The shell is not in too bad shape. So before I weigh it in does anybody need any bits cut off? PM me if you want anything.
Edited by Ben H on 28th Feb, 2013. http://www.twin-turbo.co.uk
|
||||||
 538 Posts Member #: 9393 Use the search function before buying stuff from me... stoke on trent |
28th Feb, 2013 at 01:07:47pm
Iv got a bulkhead already cut off my car
Edited by dev 11 on 28th Feb, 2013. |
||||||
 9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
28th Feb, 2013 at 01:18:38pm
Yes I want one. Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
 10022 Posts Member #: 1456 Mongo Barnsley, South Flatcapshire |
28th Feb, 2013 at 01:51:28pm
I wouldn't mind a sizeable chunk from the back end of that shell (and the chrome strips from the tops of the companion bins) If something is worth doing, it's worth doing half of. |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
28th Feb, 2013 at 02:08:23pm
If the bit under the rear window is good, they seem to be in high demand on TMF etc.
Edited by apbellamy on 28th Feb, 2013. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
|
3329 Posts Member #: 184 Senior Member Melton Mowbray, Pie Country |
28th Feb, 2013 at 02:50:26pm
The boot looks pretty good. http://www.twin-turbo.co.uk
|
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
28th Feb, 2013 at 02:58:21pm
Just a thought, can I have the speaker holes, make it easier than cutting some!!!
Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
28th Feb, 2013 at 03:00:52pm
Thinking out loud for John (as it's muggins here that will be doing the welding to sort his shell out...) He would want it cut through the floor just in front of the B post and on the B and C post just above the lower window line on. In effect the bit you might make a trailer from.
Edited by apbellamy on 28th Feb, 2013. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 6729 Posts Member #: 618 Post Whore Glasgow |
28th Feb, 2013 at 04:01:08pm
that doesn't look like a bad shell |
||||||
 641 Posts Member #: 9937 Post Whore somewhereintheuniverse near selkirk scotland |
28th Feb, 2013 at 06:37:11pm
shame to cut up a good shell mate, just for the bulkhead give em hell |
||||||
 1755 Posts Member #: 8852 Post Whore leicestershire |
28th Feb, 2013 at 06:38:31pm
Whats the front end like? Wings and front panel 13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat! |
||||||
|
Forum Mod  4828 Posts Member #: 154 Post Whore Midlands |
28th Feb, 2013 at 07:42:35pm
I could use the bottoms of both B posts please, say about 6" up and across each way if they're any good? On 20th Oct, 2015 Tom Fenton said:
Well here is the news, you are not welcome here, FUCK OFF. |
||||||
|
603 Posts Member #: 1938 Post Whore near Dundee |
28th Feb, 2013 at 07:55:28pm
wouldnt mind the seam strips if they arent rotten |
||||||
|
9258 Posts Member #: 123 Post Whore Betwix Harrogate and York |
28th Feb, 2013 at 08:03:55pm
On 28th Feb, 2013 mercenary62 said:
shame to cut up a good shell mate, just for the bulkhead Fastest 998 mini in the world? 13.05 1/4 mile 106mph
On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination, talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry. |
||||||
 319 Posts Member #: 1742 Senior Member essex |
28th Feb, 2013 at 09:20:55pm
i could do with a o/s screen pillar inc roof corner down to scuttle end if possible. My small bore turbo project http://www.turbominis.co.uk/forums/index.php?p=vt&tid=473901 |
||||||
|
432 Posts Member #: 7856 Senior Member Essex |
28th Feb, 2013 at 09:24:35pm
I could do with a bit of floor/lower bulkhead, i've messaged you! |
||||||
 7265 Posts Member #: 1268 The Boom Boom speaker Police! Essex |
28th Feb, 2013 at 10:23:11pm
I could do with a small section of the drivers side rear pillar/roof gutter if it is available. In the 13's at last!.. Just |
||||||
|
641 Posts Member #: 9937 Post Whore somewhereintheuniverse near selkirk scotland |
28th Feb, 2013 at 11:16:49pm
ok will , i guess itl help quite a few on here at least keep thier minis on the road give em hell |
||||||
 9812 Posts Member #: 332 Resident Cylinder Head Modifier Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem |
28th Feb, 2013 at 11:55:33pm
so theres nowt left now Ben ...lol Edited by BENROSS on 28th Feb, 2013.
|
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
1st Mar, 2013 at 08:42:00pm
The rear seat overhang and the bins are worth cutting out and keeping. Some one is always after those to put a car back to normal lol On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
 1713 Posts Member #: 8480 MS Paint flat cap champion & Morris Ital Lover From Sheffield now live in York tha noz |
3rd Mar, 2013 at 12:15:44pm
Hear hear-For every shell I have seen cut up on here and other forums I must have seen 100 perfectly servicable cars taken apart, ruined and never put back together! On 28th Feb, 2013 wil_h said:
Ben and I had this conversation. But reality is It's not a rare year, It's not perfect, it has no v5 and we may save some other shells by giving bits away. On 28th Feb, 2013 mercenary62 said: shame to cut up a good shell mate, just for the bulkhead On 18th Oct, 2013 apbellamy said:
I am feeling particularly BACish today. On 5th Oct, 2014 Shauna said:
What that's crazy, you go commando hahaha! How heavy is your helmet  ? The Morris Ital assassin! |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
3rd Mar, 2013 at 01:18:38pm
On 1st Mar, 2013 Sprocket said:
The rear seat overhang and the bins are worth cutting out and keeping. Some one is always after those to put a car back to normal lol The full boot floor and half rear panel are going on John's clubman. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
 1170 Posts Member #: 8636 Post Whore Surrey |
3rd Mar, 2013 at 10:07:13pm
Any chance of a section of panel where the rear subframe bolts too?
Reading up on RTS Clutches On 21st Sep, 2006 Paul S said: Go on, be brave, put it in the car and tell us how it works. Pity your bollocks are in line with the flywheel! On 27th May, 2013 robert said:
putting my testicles on the line for turbo mini owners everywhere ,and they still work ! |
||||||
| Home > For Sale > Cutting Up Shell | |||||||
|
|||||||
| Page: |