Bits left over from my build
Turbo Mini Forums

Hi all some bits left over from the engine build and stuff hanging about in the garage.

Crank - £170 Posted to the UK mainland.
998 A series crank, Fresh re-grind, Balanced, and Heat treated by Force Racing - Comes with ACL mains bearings, which were installed into the caps torqued plastiguage and turned over so have some witness marks on them.
MB = +0.020
BE = +0.010
Only selling as I got a wedged crank cheap.




Steering Wheel - £15 + post


HS6 Carb - £95 posted
Rebuilt (new jet, float needle, spindle, throte disc, etc), new Yellow spring, New black anti sink float, No needle, bearing dashpot, Long trumpet. Not used as it wont fit..





TD Backplate - SOLD
This has been tested fitted but the previous owner, not used as the wife got me the DNS retrosport cover.


Any Questions lmk

Edited by gr4h4m on 8th Apr, 2013.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

I'll take the backplate, pm me your paypal please chap :)

I recognise that backplate :)

Metric is for people who can't do fractions.

Yep :) its was all good until the wife baught me the dsn cover, which casued a load of pain and having to purchase a new MED pulley..

Anyway SOLD to NICK

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Offers before ebay?

I also have some 1.5 Titan rockers, full rollers. they have a bit of chafing on the sides which I cleaned up. I just decided at the last min to stick with 1.3's.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

How much for the roller rockers?

Can you send pics? Especially the chafing.