new actuator fitted
Turbo Mini Forums

well got my 10 psi acutor from avon bar yesturday, my god what a tight fit, but she got in , in the end, set her up using a t piece, low gauge and my compressor set on 1 bar and a airline attachment, got her set to 6 psi first time when i took her out, then she hope fully has got 12 psi on the bleed off.

but what a diffence she makes , the car feels a lot more responsive for the same boost, just got to wait for friday for my rolling road session using new low comp head.

so watch this space.

mind you have a bit of trouble keeping her cool in the last few days just about manged about 96 deg with all fans running cruising at 50 mph. hoooooooot.

always looking for them bigger bunches of bannanas

what stat temp deg have you in ?

she may be running too much advance or too lean?

she has got 74 deg in, 27 deg advance, and she is running to rich at the moment, rather than to lean, about 8 per,

always looking for them bigger bunches of bannanas

Nice one hoggy, im sure you will get 12 psi with bleed off as your bleed valve should now be more responsive (so be carefull!!!)

Good luck for friday:)

-MINI CLUBMAN 1380 TURBO-

yes nice one mate, or retard would heat things up to.

Edited by Miniwilliams on 26th Jun, 2005.

Best 1/4 mile 13.2 seconds @116 mph
First 5 port miniturbo to make over 200 bhp on a carb?
First 5 port miniturbo to make over 200 bhp on Injection?

http://www.mattwoodsphotography.com