KAD Front Anti Roll Bar, and more bits and bobs added.
Turbo Mini Forums

I dont need my KAD Front Anti Roll Bar anymore Its missing the little weld in bits (as there welded to me subby) but I am sure you could get them from Kad for the price of a beer. It could do with a bit of a clean up. Its got to be worth £130.00 posted

Some pics of it fitted.






This is what kad says about it------


KAD Front Anti Roll Bar is an ideal addition to any Mini.

The Mini with a high roll centre benefits from the fitment of anti roll bars to control unwanted body roll. Anti Roll Bars helps to prevent this body roll without having to fit or adjust shock absorbers to full stiffness, which in a road car means you can gain performance while keeping comfort.

KAD’s anti roll bars fit without protruding beneath the car and are supplied in 5/8” bar diameters with all of the necessary fitting hardware. The bars themselves are Zinc plated for corrosion resistance.

This kit requires the roll bar brackets to be welded to the subframe. The bar itself is then 2 piece for easy fitment. The benefits of this kit is that the roll bar is more direct along with extra ground clearance gained which can be vital on competition cars. Drop links are then used to connect the roll bar to the top arm. Drop links are adjustable so you can set the bar to zero pre-load.

All fittings that you will require are included in the kit

Edited by madmk1 on 29th Apr, 2013.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

More stuff--

All prices are minus the postage and I am open to offers. Also i could be at Newquay this weekend if that helps.

Alloy Expansion Bottle / tank. £15 Sold
wheel spacers £5.00 each set
Fan blades Sold
SS Radiator bracket £5 Sold
Oil pressure gauge hose- Sold...
New fuel pump rubber mounts £5


Mk1 right had tank starp £10
denso alternator regulator £5 Sold
A smaller ligther clutch slave cylinder £10 Sold
Over 3m of fuel hose and some small bits £28
new in the box Volt gauge But the front is missing £5
simths dual gauge was working fine about from the sensor has come off, I have heard that they can fix this. £25.

Edited by madmk1 on 30th Apr, 2013.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

£10 posted on the oil pressure hose? can send payment now? :)

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Does the clutch slave take the standard 3/8 unf banjo bolt? I'll take it all the same. can you pm me a price with postage?

Yes it takes a 3/8 banjo mate , but there mounting holes are closer together.

I will pm you now mate.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

I'll take the alloy expansion tank. PM about payment please mate.

WWW.TURBO-MINI.COM

That should be all the pms replied to..

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

What's the slave from?

In the 13's at last!.. Just

I am not sure mate, I got it at a show.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Hi how much you looking for the fuel hose posted?
Cheers
Fred

i'll take the ss radiator bracket :)
saves painting mine again.
PM us you about payment

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

That should be all the pms replyed to i hope to post all this stuff tomorrow.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Sneaky question. . The rollbar... is it made out of a full bar or is it a hollow tube?

you can do anything if you set your mind to it...
i rather blow it up winning than keep it together losing.

finish date set for project 1... march 2018

cheers look forward to the post man :)

What the mind can conceive the mini can achieve
MITP 2012 17.01 seconds 1/4 mile against "The Don"
MITP 2013 16.83 seconds 1/4 mile

is the roll bar still for sale?
cheers
neil

yes mate its still here.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Lads I am sorry, I had no time today to get this stuff in the post, as the mk1 was fighting me most of the day.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Money sent mate.

WWW.TURBO-MINI.COM

Thanks mate.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.