Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Beginners Tech > fuel pumps/pressures

J.P.1990

9 Posts
Member #: 10417
Junior Member

29th Apr, 2013 at 11:28:03pm

ok so i'm just looking at getting a fuel pump and regulator for my project, i've got a metro turbo lump which is all standard and i'm looking to be getting about 120 bhp, fueling wise what fuel pump and regulator should i be looking at? has anyone got any recommendations?

wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

30th Apr, 2013 at 06:47:38am

I would recommend the standard pump and regulator.

The standard regulator is really the only choice as it needs to be rising rate with boost. they are aviable widley.

Any injection rollervane type pump will do. At least rated to 45psi, but I wouldn't go to high.

There is a rollervane pump available that is specifically made for carb applications, can't remember the spec at the moment. Edit it's the Walbro FP612 or Sytec FSEFP612 (which is the same pump)

Merlin sell this http://www.merlinmotorsport.co.uk/p12695/F...oduct_info.html

Edited by wil_h on 30th Apr, 2013.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.

Home > Beginners Tech > fuel pumps/pressures
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: