Page:
Home > Help Needed / General Tech Chat > Windscreen refitting

1275min

186 Posts
Member #: 538
Advanced Member

Frimley, Surrey

28th May, 2013 at 08:14:03pm

Hi Guys,

Ive got to pop my winscreen back in tomo. I've fitted the front and back once before a few years ago now. Ive got to fit the front as i have had the scuttle painted, but i need to do this before i bring the car home. I just wonderered if you guys would confirm the easiest way to fit the screen.
Seal on the screen or seal on the car?
Last thing i want to do is scartch the scuttle. I have just watched a video on u tube and i was noit impressed. The guy uses a knife to cut the old screen out! When he fits the new one he uses a large flat blade screwdriver, luckily he does not slip!

BENROSS

User Avatar

9812 Posts
Member #: 332
Resident Cylinder Head Modifier

Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem

28th May, 2013 at 08:22:52pm

rubber in the opening then fit the screen in the bottom central, then tease it in with the old flat blade screwdriver iam afraid,
couple of inch each side at a time thumping it in with your palm............... GOOD LUCK and dont rush it

use the sealent when you have the window installed then the silver bead in the middle .... but you need a tool for this they are not expensive google it ...... maybe ebay ?

Edited by BENROSS on 28th May, 2013.






1275min

186 Posts
Member #: 538
Advanced Member

Frimley, Surrey

28th May, 2013 at 08:30:55pm

Thank you. As i thought but just needed some reassurance.
Ive got the chrome insert tool.
Home > Help Needed / General Tech Chat > Windscreen refitting
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: