| Page: |
| Home > Help Needed / General Tech Chat > engine builders take on this cam spec | |||||||
|
72 Posts Member #: 10523 Advanced Member PALM BAY FLORIDA U S A |
20th Sep, 2013 at 02:03:38pm
hello can someone that knows about reading a cam card tell me if these specs will be a good turbo cam. its a custom grind piper cam made for the 1275 engine. c if I can state this correctly, INLET open 22 BTDC close 62 ABDC DUR- 264 V/L 0.350 V/C 0.014 F/L 110 LATDC 0.048 EXHAUST open 72 BBDC CLOSED 32 ATDC DUR- 284 V/L 0.396 V/C 0.014 F/L 110 LATDC 0.078 - this would be for a fast road car 1293 omega forged, 1.5 med full roller rockers, the best available ported turbo head etc etc etc. so if someone knows how to read this plz advise thx you. |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
20th Sep, 2013 at 02:17:45pm
that looks like a good cam similar to the early avonbar phase 2 On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
| Home > Help Needed / General Tech Chat > engine builders take on this cam spec | |||||||
|
|||||||
| Page: |