Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Show Us Yours! > JT's Turbo Clubman

JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

So here's a pic of the mini getting it's suspension sorted...



Went out for a drive Sunday. Absolutely flying along. Finally getting some miles on her! Then this....



I no I shouldn't of but I upped the boost a bit. To be fair it was running the same boost all weekend. Including the trip to mini spares pottersbar on Saturday. And the AFR gauge was reading fine.
What I didn't do, which I do usually do is re torque the head down after its been run up to temperature. Lesson learned there!
I'm going to drill and tap for the extra two studs whilst it's off as it looks like that's where it's gone. Going to have a go at doing it in situ. I have access to a mag drill.

Anyway was good fun whilst it was going.
And so glad it's dry decked!!

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Well got head off.




So today I managed to drill the head for the two extra studs with great success!! :)
Was going go drill the block with a mag drill I've borrowed from a mate, but he's seemed to of lost the chuck adapter for it. So I've had to order one. Hopefully next weekend I can do the block end!

Is it a common area for it to go there?

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire



My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


minimole23

4299 Posts
Member #: 1321
Post Whore

Wiltshire

Proper job, hopefully that's sorted it.

On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Hope so mate. Not looking forward to doing the block.
15mm deep clutch end then 12mm water pump end isn't it?

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking




On 26th Aug, 2017 JT said:
Well got head off.




Is no 4 piston ok? Looks like you have taken a chunk out of it ?

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Yea it's all there mate.

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


D4VE

User Avatar

2974 Posts
Member #: 10749
Post Whore

lowestoft suffolk

Jeez i see what simon means...

On 24th Oct, 2015 jonny f said:
Nothing gets past Dave lol

NOTHING GETS PAST ME!! *tongue*

1/4 mile 14.7 @ 96mph 12psi boost
Showdown class A 2nd place 18.6 @ 69mph


shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

Hi,
Don't want to piss on anyone's bonfire but is that damage to the piston top (outer edge of no 4, clutch end).
I had similar happen a few fears ago and manage to crack the ring lands.
Shane


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

I'll have a closer look at it. There is there a way to check it without stripping it?

I guess a compression test once it's back together will tell?

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire



Another pic

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

A compression test may prove nothing.
When mine went the symptom was smoke out of the exhaust when re applying throttle after "over un" / throttle closed.
Myself and d4ve wasted hours swapping things out and him following me up the local bypas trying to eliminate the cause. In the end I bit the bullet and heeded everyone on here's advise and tore the block down.
I appreciate pulling the engine and checking is a PITA but no worse than putting the head back on and finding you still have issues.
If you search some of my historic disaster threads hopefully this should be enough of case for you to aire on the cautious side and check.

Shane


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

What should I search for Shane? I'll have a look.

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=285835

Sadly I seem to fell foul of Photobucket also.

Shane


shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=285835

Sadly I seem to fell foul of Photobucket also.

Shane


shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=385557

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=446778

Off the top of my head, these document some of te carnage, but sadly lacking the images it's not much help.

Shane


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Double post

Edited by JT on 27th Aug, 2017.

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Shame there's no pics.
I didn't think the piston looked that badly damaged. But I'm not highly experienced I guess.

So if I put it all back together and it smokes on the over run, I've probably damaged the piston ring land?
The bore looks fine. I'll turn the engine over next time I'm down there and have a proper look.

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


shane

User Avatar

2618 Posts
Member #: 1246
Post Whore

Lowestoft, Suffolk.

There is usually no smoke without fire.
Having four failed engines behind me and MANY lessons learned I'd urge you to tear it down to check even if only as a damage limitation excesisise.
It could save you a lot of time and more importantly ££££
Shane


Turbo Phil

User Avatar

4619 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Are there any signs of det around the edges of the pistons at all ? Even any very tiny marks ? Get a really good torch and look very closely. Turning the engine over until the offending cylinder is at TDC will help.

Phil.

WWW.TURBO-MINI.COM


D4VE

User Avatar

2974 Posts
Member #: 10749
Post Whore

lowestoft suffolk

From that other pic you have put up its sadly not just a reflection like it could of been in original post as what simon pointed out is still in same position *oh well*

On 24th Oct, 2015 jonny f said:
Nothing gets past Dave lol

NOTHING GETS PAST ME!! *tongue*

1/4 mile 14.7 @ 96mph 12psi boost
Showdown class A 2nd place 18.6 @ 69mph


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

There is definitely a small mark on piston number 4
Right on the edge. I can't see any othe marks.. next time im at the workshop I'll get pics up with the piston at tdc and a torch on it.
I assumed it was a mark from where the piston clipped a bit of gasket or something.

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking




On 28th Aug, 2017 JT said:
There is definitely a small mark on piston number 4
Right on the edge. I can't see any othe marks.. next time im at the workshop I'll get pics up with the piston at tdc and a torch on it.
I assumed it was a mark from where the piston clipped a bit of gasket or something.


I only speak from experience I have a piston in the shed that looks fine on top, apart from some small pin size holes, but all the ring lands are gone. It cost me a hole world of hurt. Like said about worth looking deeper if you can.

It's all part of the fun when you play with your knob in the car, it's only going to end bad.... as I found out so many times.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


JT

User Avatar

2742 Posts
Member #: 637
Post Whore

Hertfordshire

Okay here's some more pics...







I can't see any signs of det. But maybe you guys can lol.
The bores still have the hone marks on them and no other marks.

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985


D4VE

User Avatar

2974 Posts
Member #: 10749
Post Whore

lowestoft suffolk

U cant see the mark at 6 oclock, 9 oclock n 11 in picture order?

On 24th Oct, 2015 jonny f said:
Nothing gets past Dave lol

NOTHING GETS PAST ME!! *tongue*

1/4 mile 14.7 @ 96mph 12psi boost
Showdown class A 2nd place 18.6 @ 69mph

Home > Show Us Yours! > JT's Turbo Clubman
Users viewing this thread: none. (+ 1 Guests) <- Prev   Next ->
To post messages you must be logged in!
Username: Password:
Page: