Updated: Project and all spares for sale
Turbo Mini Forums

Gents,

I have finally come to the conclusion to sell my mini. I have put it on ebay. Here is the link

http://bit.ly/1coLEvo

Edited by liam mini 35 on 10th Mar, 2014.

The turbo build has finally started

http://item.mobileweb.ebay.co.uk/viewitem?...Id=271361717214

The turbo build has finally started

Gutted for u mate

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=445578

do you sell plastic parts separately?

Ladies/Gents, i really need this gone now so i sm willing to let the whole lot go for £1000 as i need the money for my house deposit. If interested please contact me on here or give me a call on 078 888 49551.

I have come to the conclusion that i am not going to get anything done on the car for a while and i havent got the time or money for a project at the moment and should really be saving up for a house. Plus i just havent got the skills to do it.

The car is a 94 Mini 35 in Arizona blue. It is completely stripped to a bare shell, ready for the welding to comemnce. (Which i can't do) it has only had 1 owner from new previous to me and had only done about 65k when i took it off the road in 2010. (shows how much time i have spent on it)

I have the V5 and all the documentation to go with it plus a lot of other paper work. The car is currently declared SORN.

The work required on it but limited to the following is;

both flitch pannels
scuttle
top dash rail
Both Inner sills
Both Outer sills
Both A pannels
Boot floor (intended on putting a Fibreglass floor in)

The car has most of the bits taken from the car IE engine, interior, loom etc apart from doors, boot lid, bonnet, sub frames and breaks as these were going to be replaced.

The car will also include a number of other parts such as 1 piece fibreglass front, single skin mk1 boot, light weight fiberglass doors, fiberglass boot floor, miglia arches with brackets and door locks all from arc angels. Turbo carb and plenum, mini spares/sport 1.5 rockers, set of 1.25 twin carbs, replacement panels and a floor from another mini, 10x6 wellers and a set of DSN Classic alloy rear subframe mounts (to heal board only).

The car will obviously need to be trailerd away and i will not sell the parts individually.

I believe i have set a fair reserve for all car and all the stuff, if you win the auction and decide you will get more money by splitting the parts i have no issues with that.

The turbo build has finally started