Page: |
Home > General Chat > manifold | |||||||
134 Posts Member #: 10548 Advanced Member chesterfield |
12th Feb, 2014 at 08:16:29pm
Hi all I've been looking at making a manifold so I don't have to cut the bulk head. I've looked on the search but can't seem to find anything about them being made.
|
||||||
![]() 4630 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
12th Feb, 2014 at 08:38:04pm
Search Mirage, or Matty manifolds.
|
||||||
134 Posts Member #: 10548 Advanced Member chesterfield |
13th Feb, 2014 at 06:29:16pm
Ok Phil thanks Ill have a look |
||||||
![]() 538 Posts Member #: 9393 Use the search function before buying stuff from me... stoke on trent |
13th Feb, 2014 at 06:57:31pm
i bought the mini flanges off ebay, a turbo flange for the gt1752, a t piece 2x 90 degree bends and a section of straight, pidgeon shitted it all together... yet to see if itt will hold up to the heat etc but it fits...
|
||||||
![]() 5417 Posts Member #: 6181 Double hard bastard brookwood woking |
13th Feb, 2014 at 07:06:58pm
Make sure you don't get carried away grinding that block! As I remember some dick head on here grinding right through lol. I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
134 Posts Member #: 10548 Advanced Member chesterfield |
14th Feb, 2014 at 08:33:45pm
I like the look of that this is what i was thinking of doing but i spoke to a fella at work and he lost me with flow etc lol
|
||||||
![]() 1425 Posts Member #: 9199 Post Whore Lancashire |
14th Feb, 2014 at 10:19:40pm
Marty's manifolds don't require the block to be ground but do require some fabrication for the actuator bracket. What the mind can conceive the mini can achieve
|
||||||
![]() 538 Posts Member #: 9393 Use the search function before buying stuff from me... stoke on trent |
15th Feb, 2014 at 12:22:12am
Tbh that didnt need grinding away there was about 5 mm clearance, I just did it with a linisher only light simon dont worry its not about go through haha :) |
||||||
1767 Posts Member #: 9165 Previously josh4444 Australia, brisbane |
15th Feb, 2014 at 06:38:51am
sometimes i wish id taken this route for simplicity
|
||||||
![]() 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
15th Feb, 2014 at 07:03:41am
Who's Marty?
On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it ![]() |
||||||
![]() 1425 Posts Member #: 9199 Post Whore Lancashire |
15th Feb, 2014 at 07:42:52am
Marty is a stupid ipad mini On 15th Feb, 2014 Turbo This.. said:
sometimes i wish id taken this route for simplicity i think i rember something about using a larger bore center runner to wipe out the bad pressure pulses that are normally brought on by this super short design?? dont know if its correct tho! What the mind can conceive the mini can achieve
|
||||||
134 Posts Member #: 10548 Advanced Member chesterfield |
16th Feb, 2014 at 07:38:51pm
Had a quick look on ebay but cant find any flanges for sale at moment but there seems to be plenty of bends, straights, t's etc in stainless. Can I assume thicker the steel the better or am I missing something.
|
||||||
336 Posts Member #: 9941 Senior Member Derby |
16th Feb, 2014 at 10:16:31pm
My matty manifold required a block fettle Edited by jamiestevenbell on 16th Feb, 2014. |
||||||
![]() 538 Posts Member #: 9393 Use the search function before buying stuff from me... stoke on trent |
16th Feb, 2014 at 11:29:41pm
Cut them off an old lcb if needed mate |
||||||
![]() 1425 Posts Member #: 9199 Post Whore Lancashire |
17th Feb, 2014 at 07:46:16am
On 16th Feb, 2014 jamiestevenbell said:
My matty manifold required a block fettle What the mind can conceive the mini can achieve
|
||||||
![]() 1425 Posts Member #: 9199 Post Whore Lancashire |
17th Feb, 2014 at 07:47:21am
Hi Tony, i'll have a word with a mate who had some cut.
On 16th Feb, 2014 tony 69 said:
Had a quick look on ebay but cant find any flanges for sale at moment but there seems to be plenty of bends, straights, t's etc in stainless. Can I assume thicker the steel the better or am I missing something. If anyone has some spare they willing to sell please let me know. What the mind can conceive the mini can achieve
|
||||||
134 Posts Member #: 10548 Advanced Member chesterfield |
18th Feb, 2014 at 06:56:14pm
That would be great thanks. |
||||||
![]() 1425 Posts Member #: 9199 Post Whore Lancashire |
18th Feb, 2014 at 08:58:52pm
Just dropped him a message on FB.
On 18th Feb, 2014 tony 69 said:
That would be great thanks. What the mind can conceive the mini can achieve
|
||||||
Home > General Chat > manifold | |||||||
|
Page: |