DSN Retrosport timing chain cover and megajolt
Turbo Mini Forums

How do folks

Since the mini has been built up I've been plagued with a leaking timing chain cover so I want to try a DSN one.

Has anyone used one with a megajolt set up and which trigger bracket was used? I currently have a bodged MED one due to me using a lightweight back plate I had to hack it around a bit.

Any pics great fully appreciated

Tom

Yep I have one and I used:

The med management pulley with superchaeger belt addon thing

The dsn merrelli bracket and sensor which fits the ford pug, but I can't remember if I had to swap the wires over?

And I had to cut off the timing marker from the cover... So it would clear the pulley and boom I was off....

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Oh yes and you have to cut the tooth out...

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

I've also got one, tho still had to shim it with some spacers it is nice and solid

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!

Edited by alaskanow0 on 5th Mar, 2014.

Class C 3rd Place Avon 2011 14.18 @101mph

Cheers guys, Alaskanow0 do you have a smaller photo?

Class C 3rd Place Avon 2011 14.18 @101mph

Boom!

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Cheers, is the sensor set up for the exact spot for top dead centre?