omega piston rings
Turbo Mini Forums

hey guys , not long ago i picked up some +20 omega cast pistons with a 10cc dish for 100 quid , now they came with use rings but its good practice to fit new isnt it ? i will be having my engine bored to 1293 and giving the machine shop the pistons , will these rings be ok or will i have to get a set from omega them selfs https://www.minispares.com/product/Classic/...ack%20to%20shop

thanks in advance

measure your rings and double check the size is correct other than that they should be ok

Done now needs redoing lol

hey guys , so i managed to get around to measuring my rings and the measurments came back as :

0.0236"
0.0236"

0.04567"
0.04488"

and the wavy oil ring was 3.75 mm

now the measurements on the minispares website are

0.0470"

0.1575"

4mm oil ring

any help would be grand

MED will have the correct rings.