Page:
Home > Help Needed / General Tech Chat > geometry talk

eden7842

User Avatar

1755 Posts
Member #: 8852
Post Whore

leicestershire

Ayup all.

Well the minis out and about but as it stands my setup sucks balls! Until I've got it sorted I carnt turn the boost up as the lsd takes me were it wants.

What sort of settings should I be aiming for? Front end is fully adjustable

Cheers eden

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!


nala56

User Avatar

825 Posts
Member #: 9661
Post Whore

Sheffield South Yorkshire GB.

Mini spares have that info on there site

Edited by nala56 on 26th May, 2014.

Main Build
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=489133

Upgrade to Turbo
http://www.turbominis.co.uk/forums/index.p...tid=448367&fr=0


madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

Paul W told me it's called stance!

I found the best thing was to have the car corner weighted, as I find it helps with the weaving.

This is my personal experience, as I have always had it done and I don't seem to have any torque steer ever, I don't go for the hole low thing just setup right from the start.

Simon.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


eden7842

User Avatar

1755 Posts
Member #: 8852
Post Whore

leicestershire

I do want to get it corner weighted Simon, it's just finding a decent bloke close to do it.

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!


madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

I go to slarks mate as it drives so much batter after it's been done. It's worth it in my eyes, I will be back down agin before MITP.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


eden7842

User Avatar

1755 Posts
Member #: 8852
Post Whore

leicestershire

Yeah I've gota sort it ASAP too. Slarks is just way too far away.

Anyone know of any in Leicestershire. Ben h perhaps knows someone I believe he's Melton way?

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!


Nick
Forum Mod

User Avatar

4828 Posts
Member #: 154
Post Whore

Midlands

Go see Dave Yardy to get it setup, about the best place and not toooo far from you.

Transformed my car after he set it up for me.

All I can remember was 5.5 degrees castor, 1 degree negative camber up front. 0.5 degree negative camber at the back and a tiny little bit of toe in.

On 20th Oct, 2015 Tom Fenton said:

Well here is the news, you are not welcome here, FUCK OFF.


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

Ben and I have all the gear so do it ourselves. I'm happy to set peoples car up for free, but the gear is in Yorkshire.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


eden7842

User Avatar

1755 Posts
Member #: 8852
Post Whore

leicestershire

Where abouts is he nick?

And where are you wil I could make a day of it if your about soon? Cheers

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!


Nick
Forum Mod

User Avatar

4828 Posts
Member #: 154
Post Whore

Midlands

Dave's down by Northampton, just off J16 M1. I can bet he won't be as cheap as Wil though, lol.

On 20th Oct, 2015 Tom Fenton said:

Well here is the news, you are not welcome here, FUCK OFF.


Star Mag

User Avatar

1745 Posts
Member #: 375
Post Whore

Leicestershire

I had the same problem when I fitted my quaiffe. The car was awful to drive as it would pull all over the road. I found it highlighted a bad setup!

I was going to get it setup but decided to have a go myself. I set the tracking with a straight long length of angle and a tape measure and set it with some tow in.

I managed to borrow a ADA camber and castor guage to set that part of the suspension. I photocopied that and stuck it to a piece of wood 😃

The car drove a lot better but I still had a pull to the left under boost. I found that by altering the front suspension ride height I managed to stop the pull. I dropped the height on the left and upped it in the right.

It took some trial and error but I got there in the end. It would have been quicker to have it setup for sure!

I started with some of the settings that I found in a thread on here. I've been playing with them ever since! My best 60ft to date on road tyres is 2.18 and will run consistent 2.2 second 60's.

Ron


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

I'm about for the next few weekends, near Boroughbridge. Now is a good time as the garage is empty.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

I may pop up with my heap at some point in the next month or two Wil if the offer is still open at that point.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*


eden7842

User Avatar

1755 Posts
Member #: 8852
Post Whore

leicestershire

If I had a trailer I'd take you straight up on that offer wil, North of Leeds os a bit too far when I've not really tested the car fully. Really appreciate the offer tho.

I'm getting hold of some gauges so going to give it a go myself. See how it goes.

Found a thread where you had posted some basic settings to start from wil.

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

Whenever you want. Just give me a buzz.

If you do it on a weeknight, then we should be able to squeeze in a beer aswell.


On 27th May, 2014 apbellamy said:
I may pop up with my heap at some point in the next month or two Wil if the offer is still open at that point.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph



On 2nd Jan, 2013 fastcarl said:

the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

Good plan. I'll shout once it's road legal.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*


wolfie29177

133 Posts
Member #: 476
Advanced Member

The Black Countraaaaay

Aldon Automotive in Brierley Bonk used to do it but not sure if they still do

Masturbation is not a crime its a hobby


eden7842

User Avatar

1755 Posts
Member #: 8852
Post Whore

leicestershire

Well I've had a good go this evening and it's far far better. Just gota wait for it to dry up for some proper testing.

As it stands I'm very happy with the results

13.95 1/4 mile on a 2.95 fd. Carnt be that hard to beat!


theoneeyedlizard

User Avatar

7265 Posts
Member #: 1268
The Boom Boom speaker Police!

Essex

What settings have you gone with Eden?

I'll be having a look at mine in the near future.

In the 13's at last!.. Just

Home > Help Needed / General Tech Chat > geometry talk
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: