| Page: |
| Home > Help Needed / General Tech Chat > Turbo on e bay | |||||||
|
13 Posts Member #: 10856 Member Newcastle upon Tyne |
16th Jun, 2014 at 07:49:59pm
Am I missing something there is a turbo technic a series kit on e bay and the carb mounts on the turbo,
Tony |
||||||
 3673 Posts Member #: 9300 Post Whore Quarry Bonk |
16th Jun, 2014 at 07:57:51pm
Suck through similar to a supercharged setup, I'd avoid it, you're likely to have fuelling problems. I can imagine as the air fuel mix passes the compressor that it cools, fuel condenses and then gets thrown at the edges of the compressor housing :/ On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
 300 Posts Member #: 1746 Senior Member Kent |
16th Jun, 2014 at 08:33:56pm
Why would you have any different fueling issues to a suck through supercharger set up, i know a turbo spins faster but still would have to overcome the same fuelling surely.
|
||||||
 9812 Posts Member #: 332 Resident Cylinder Head Modifier Mitsi Evo 7, 911, Cossie. & all the chavs ...... won no problem |
16th Jun, 2014 at 09:15:01pm
suck through systems are a dead duck.
|
||||||
|
3006 Posts Member #: 2500 Post Whore Buckinghamshire |
17th Jun, 2014 at 05:19:41am
At least with a blowthrough all that leaks is air - with suck through it could be a bit worrying if fuel vapour is leaking ?
|
||||||
 53 Posts Member #: 10528 Advanced Member Denmark |
17th Jun, 2014 at 05:58:34pm
That is the exact same kit/setup, as my old one, T3 unit with a Hif 44 on the side :), i still have my old engine:)..
Edited by Gomme on 17th Jun, 2014. |
||||||
|
5 Posts Member #: 10879 Junior Member Kent |
17th Jun, 2014 at 09:02:05pm
Is this the one?
|
||||||
|
3673 Posts Member #: 9300 Post Whore Quarry Bonk |
17th Jun, 2014 at 09:09:13pm
Well there's no inlet manifold from turbo to head, i can see that being fun to fabricate :/ On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
| Home > Help Needed / General Tech Chat > Turbo on e bay | |||||||
|
|||||||
| Page: |