exhaust sections
Turbo Mini Forums

where's best to buy exhaust bends ect for making manifolds up? ebay ? also is the a preferred suitable size ie 2mm thick wall?

Done now needs redoing lol

I used allstainless for my turbo one a while back, they were decent

I'm working on the same thing, looking at using Stainless fittings from BSS. 'Sch40' is the type I'm considering, there about 3mm thick, should take a lot of heat and pressure punishment. I'm planing on using 1 1/4".

cheers for the reply's guys

Done now needs redoing lol

Ive used the schedule 40 stuff and its pretty bomb proof, bit heavy though, although lighter than a cast one!

also look at the schedule 10 stuff, if your migging it then its pretty pointless going for the sch 40 (stainless)

also depends what your doing, is it a log type or mirage/ matty style manifold, if so deffo one of the above,

If its going to be somthing more tuned length, or a remote one, I'd start looking at Mandrel bends.

cheers joe its not really for my mini its for a zetec turbo im building. im wanting to make a manifold so I can run external wastegate and a more tubular manifold. iv been looking at the madrel bends but will now look into the other bits

Done now needs redoing lol