Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Help Needed / General Tech Chat > Watercooled turbo plumbing

mayoturbo

User Avatar

673 Posts
Member #: 1395
Post Whore

chepstow

I need to plumb the watercooling in on the turbo for the GTM.

In the standard car the feed is from the hot side of the radiator and drains into the cold water entering the engine. I think this may be so it syphons after shut down and the turbo is mounted too high to be fed from the cold side.

On the GTM I have the turbo mounted lower so could feed from the cold side of the radiator and drain into the hot side.

Or is it suppose to be fed by the hot side as the water needs to be warm to stop the turbo from suffering thermal shock?

Thanks


mayoturbo

User Avatar

673 Posts
Member #: 1395
Post Whore

chepstow

Its an IHI rhf4 BB type


mayoturbo

User Avatar

673 Posts
Member #: 1395
Post Whore

chepstow

Its an IHI rhf4 BB type

Home > Help Needed / General Tech Chat > Watercooled turbo plumbing
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: