Page:
Home > General Chat > Turbo carbs and plenums

BA_Lordflash

195 Posts
Member #: 26
Advanced Member

Cannock

What sort of price is deamed reasonable for a 2nd hand carb (turbo one obviously) and plenum chamber. I have been ringing round the breakers and most are quoting ?40 for the carb and another ?40 for the plenum.

Does this seem exspensive to anyone else? I just wish burlan fuel systems would hurry up and start repoducing the turbo carb even though it would be expensive, at least you would know its in good working order etc etc.

Rant over


1310turbo

User Avatar

323 Posts
Member #: 41
Senior Member

they already to BA? i saw in a mini mag ages ago that they had the tooling and were reproducing the turbo carb to original spec, was around ?200 i think

but i would pay ?40 for a carb, maybe for a plenen too, they are getting rare now

A-series power! 1972|1310|T3 turbo|Omega pistons|Cantre main strap|Orange clutch diaphragm|AP race plate|Comp pressure plate|Lightened steel flywheel|13-row oil cooler|Vernier duplex timing gear|Phase 2 Piper cam|Green air filter|Hi boost carb needle/spring|2"Stainless exhaust|3"Play mini stainless rear box|Jack Knight s/c 4spd gearbox|Jack Knight s/c drop gears|Silicon coolant hoses|Lumenition HT leads|GAZ lowered height shocks all round|Steel flip-front|Rear safety devices cage|Group 5 arches|6x12 deep dish Minilites|Surf blue/Old english white|


minit

User Avatar

42 Posts
Member #: 141
Member

Sounds about right for a breakers price. Paid ?40 for my montego plenum IIRC. Burlen do list the turbo carb on their website, its ?220.



Oh, and hello forum *happy*


iain
Site Admin

User Avatar

8506 Posts
Member #: 16
Sold the turbo and seeing what the C20XE can do!

Near Lincoln

?80 for a turbo carb and plenum is very steep IMHO. Look to pay around ?10 for a plenum and ?30ish for a carb and inlet.
Nearly always one going on ebay, my mate bought one for about ?36 i think on ebay last week, carb, plenum and i think inlet manifold.

Burlen do make a new turbo carb for about ?200 as somebody said. If you get a second hand one the reconditioning by burnlen comes in at ?125 +vat or close anyway as that was 6months back. Rebuild kits from them are aorund ?50 for a full kit.

Welcome Minit *happy*


Turbo Phil

User Avatar

4636 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

?40 is steep for a plenum, i've seen them on Miniclassic etc for ?10-15, which seems a bit fairer. Try checking some other forums "for sale section"
I bought a rebuild kit for my carb, it is excellent and well worth the ?50+ .

Phil. *smiley*

WWW.TURBO-MINI.COM


Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

I should be putting a plenum on ebay soon, I'll keep you posted

Team Racing

On 15th May, 2009 TurboDave said:

I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials


speedfreaq

User Avatar

105 Posts
Member #: 133
Advanced Member

Jamaica

hello all (new here)

i'm from jamaica and it seems that the turbo carb never made it here.

there are a few turbo minis around but they all uses dellortos.

i cant aford a dellorto plus all the jets i would need

so i want to try and see if i could get a secondhand one from in the uk to post out to me!

anyone with a reasonably priced one want to sell?? *frown*

'I swear to use the Boost, The whole Boost'
'And nothing but the Boost..... So help me God'


Jimster
Site Admin

User Avatar

9407 Posts
Member #: 58
455bhp per ton
12 sec 1/4 mile road legal mini

Sunny Bridgend, South Wales

have you tried putting a request under the wanted section

Team Racing

On 15th May, 2009 TurboDave said:

I think the welsh one has it right!


1st to provide running proof
of turbo twinkie in a car and first to
run a 1/4 in one!!

Is your data backed up?? one extra month free for all Turbo minis members, PM me for detials

Home > General Chat > Turbo carbs and plenums
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: