Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > A-Series EFI / Injection > Metro turbo engine injection options

Turbonator

User Avatar

52 Posts
Member #: 11169
AKA: Smegmium

Derby, ish

Morning all!
OK so I just bought my mini a christmas present, a 1310 Metro turbo engine!

I have a "spare" complete Microsquirt setup (toothed wheel etc) that was going on another project but now isnt.

So i am considering my options for injection.

Option 1: Dont - risk: emissions problems @ MOT time, uncontrollable mixture (in case of detonation etc)

Option 2: Fit the kit and somehow for 2 injectors in the standard inlet manifold (and run MS in siamese mode) - problem: how can I mount the injectors?

Option 3: Fit the kit and swap the carb for a single 45mm throttle body with 2x injectors, run as a "wet manifold" setup... Problem - will need MANY squirts per cycle for even fuel/air mixture.

"If its not broke, whack a turbo on it"

https://www.youtube.com/c/turbominitv

Home > A-Series EFI / Injection > Metro turbo engine injection options
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: