is it T2 or T25?
Turbo Mini Forums

well here are some pics of the turbo ive aquired, still unsure if its a T2 or a T25 on the actual turbo itself it says:

B.C.1 M10 A/R.48 then garret and in a circle after garret says 92.

because of the positioning and wear of the label on it i cant fully read the numbers but the 1's ive managed to get are this:

27700853265

here are some piccys ive taken sorry bout the poor quality.









so can any1 tell me if this is a T2 or T25?
also any ideas what it is off?

thanx
mark

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com

I reckon t2 as my t25 has 5 bolts on the bottom picture

Metro turbo weekend driver,Mini turbo in the making again!

also the part that connets to the manifold its self says A.R .41

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com

You shouldn't concern yourself with weither it's a T2 or T25, instead it is the suitability for your engine that will determine this...


So the turbine is a 0.41 AR - well that's good at least.

What was it off?

The T25's I have seen have got 5 bolt outlet flanges so I guess its not one of them. Just for reference, some IHI turbos (punto turbo) very similar outlet but not exactly, but look to have a slightly smaller exhaust and compressor housings, I have no tech info on them so just by eye.

not sure what its off, a friend bought it originally for his car but found it was too small. and went and bought a pulsar engine instead.
the guy he bought it from was not sure what it was off.

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com

It looks very different from my T25.

My turbo is different within the exhaust housing (my wastegate isnt separated like that)

My compressor housing is different - as i cannot put silicone tube strait onto it, i have had to have another pipe made up.

AR wise it will be fine, just fit it and stop worrying!

might be a one of the newer gt-series of turbo's

measure the turbine inlet and compare to this to see if its a t-series

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=3274

Edited by dan on 9th Sep, 2005.

wasnt worrying mate i just need to know so i can get my mate to knock flanges up lol

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com

I've seen severl T2_ turbines like that... I think Jim has seen one aswell.

yes my exhaust housing is like that on my t2, would love to know what its from so I can source a gasket

Edited by Jimster on 9th Sep, 2005.

Team Racing

yep thats the 1, well the flanges etc are no longer a problem as my friends agreed to make me a custom 1 so thats not too bad.
thanx for your help lads

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com

is that a copy of max power I spotted on the floor??

Team Racing

no mate, its redline only bought it cos a few of my friends are in the back with there cars.
the front cover happens to b a 206 with a cossworth turbo lump in around 300bhp.

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com

oh and its 4wd :)

speed is the best rush i have ever had!!!

add me lanxter@hotmail.com